Silicone rubber control cables are suitable for mobile or fixed electrical instrument connection lines or signal transmission with AC rated voltage of 450/750V and below. The cables have good thermal stability and can maintain good electrical performance and flexibility in high temperature, low temperature, and corrosive environments. They are suitable for use in industries such as metallurgy, power, and petrochemicals with special requirements for mobile temperature resistance.

Usage characteristics

The rated voltage U0/U is 0.6/1KV.

2. The long-term allowable working temperature of cable conductors shall not exceed 200 ℃.

3. The laying temperature of the cable should not be lower than: fixed laying -60 ℃.

Non fixed installation -20 ℃.

4. Allowable bending radius:

The cable without armor layer should not be less than 6 times the outer diameter of the cable;

Power cables should not be less than 10 times the outer diameter of the cable;

Cables with armored structures should not be less than 12 times the outer diameter of the cable.