Manufacturing description of wind power generation equipment:

Dafeng Goldwind Technology Co., Ltd. mainly produces blades for wind turbines, which are made of composite materials such as fibers, resins, and coagulants. During the production process, the liquid level of the mixing machine needs to be measured and controlled. Due to the highly viscous and corrosive epoxy resin and special adhesive used as the medium, and the small size of the tank body, traditional contact measurement methods cannot be used. The DL series of Flowline ultrasonic level gauges from the United States, represented by Beijing Kangnansen, is specifically designed for this type of working condition and is suitable for level instruments used for measuring equipment tanks.

Flowline in the United StatesUltrasonic level gaugeDL10 features:

Compact design, small range, high accuracy, no dead zone, non-contact measurement, PVDF material sensor, suitable for various corrosive media.Flowline ultrasonic level gaugeWe are experts in the design, manufacturing, and sales of liquid level measurements for chemical solvents, water, and wastewater applications, as well as control solutions.

Description

Based on the customer's requirements and on-site working conditions, we recommend the DL10 ultrasonic level gauge for the customer. The glue mixer is one of the key equipment in the manufacturing process of the fan blades. As the start or stop of the glue inlet pump of the glue mixer is based on the change of the liquid level in the glue tank,FLOWLINEThe ultrasonic level gauge DL10 can accurately and real-time measure and display the liquid level of the glue, thereby avoiding the possibility of the glue mixer not working properly due to broken glue or excessive glue input, which may affect the progress of product production.