-
E-mail
13810083196@163.com
-
Phone
13911237038
-
Address
Building 2, Chaomingyuan, Boxing 10th Road, Yizhuang Economic and Technological Development Zone, Beijing
Beijing Pusanda Instrument Technology Co., Ltd
Analysis of Debugging and Usage Techniques for Simulating Constant Temperature and Humidity Test Chamber
Date: 2025-12-01Read: 6
Simulated constant temperature and humidity test chamberAs the core equipment for environmental reliability testing, its correct debugging and standardized use directly affect the accuracy of test results and the service life of the equipment. Mastering scientific debugging methods and practical usage skills is crucial for achieving optimal performance. 
1、 Scientific debugging process
Debugging before initial use is the fundamental work to ensure stable performance. First, we need toSimulated constant temperature and humidity test chamberPlace it in a well ventilated and stable location away from heat sources, ensuring sufficient heat dissipation space around the box. After power on, a system self-test should be performed to observe whether all indicator lights and display screens are working properly. During the debugging process, it is important to focus on checking the sensitivity of temperature and humidity sensors, and to verify measurement accuracy through comparison with standard temperature and humidity meters. For first-time use of the test chamber, it is recommended to conduct a no-load operation test, gradually increasing the temperature and humidity to the upper limit of the set range, and observing whether the equipment is running stably. During the debugging phase, it is necessary to check the sealing performance of the box door to ensure that there will be no air leakage or condensation during the testing process. After debugging is completed, an equipment operation file should be established to record initial debugging data and parameter settings.
2、 Standardized usage techniques
Special attention should be paid to the placement of samples in daily use, and the samples should be kept at an appropriate distance from the inner wall of the box to ensure smooth air circulation. When loading samples, attention should be paid to uniform weight distribution to avoid uneven stress on the box affecting temperature uniformity. Before humidity testing, it is necessary to ensure that the water source of the humidification system is clean, and regularly replace the water tank to prevent scaling and bacterial growth. For long-term continuous testing projects, it is recommended to arrange the testing cycle reasonably and allow the equipment to rest in a timely manner to extend its service life. During use, it is necessary to closely observe the operating status of the equipment. If abnormal noise, excessive temperature fluctuations, or unstable humidity control are found, the machine should be shut down for inspection in a timely manner. After the test is completed, the equipment should be shut down according to the correct procedure, and the temperature and humidity should be reduced to normal temperature and humidity before turning off the power.
3、 Key points of maintenance and upkeep
Good maintenance habits are the key to ensuring long-term stable operation. Regularly clean the inside and outside of the box, especially key components such as the condenser and humidifier, which should be cleaned with emphasis. Check the aging condition of the sealing strip and replace damaged seals in a timely manner to maintain good air tightness. When not in use for a long time, the moisture inside the box should be drained and the box should be kept dry and ventilated. Regularly calibrate temperature and humidity sensors to ensure measurement accuracy. Wipe the observation window with a specialized cleaning agent to avoid leaving water stains that may affect the observation effect. Establish a standardized maintenance log to record the content and time of each maintenance and upkeep.
Through scientific debugging methods, standardized usage techniques, and system maintenance,Simulated constant temperature and humidity test chamberBeing able to maintain optimal working conditions at all times, providing reliable technical support for product quality testing and environmental adaptability research.