Jintan Taina TN800A Inhalable Particulate Matter AnalyzerThe operation method mainly includes the following steps:

operating procedure

1. ‌Power on and Function Settings‌

• Turn on the power supply of the instrument and adjust all the function selection switches to the required state after displaying "Jintan Taina Instrument" (note: the instrument only records the switch state before measurement, and the adjustment during measurement is invalid). ‌
  

2. ‌Select storage area‌

• Use the "▼, ▲" keys to select the target storage area (0-9 areas), each area can store 50 sets of data. When the storage area is full, the data is automatically transferred to the next empty area. If there is already data in the next area, the alarm will be paused. ‌
  

3. ‌Measurement operation‌

• Press the "Measure" button to start the detection, and the data will be stored in the designated area in order. The average value of each measurement will cover the latest data in that area. ‌
  

4. ‌Print output‌

• Connect the printer through a dedicated data cable and press the "Print" button to output the current storage area data (in the format of)“

  PM2.5

  Data row+storage area number). ‌

• 
  

• Intelligent and fast usage method:

• 1Press and hold the key to turn it on2Can be opened in seconds/Shutdown, with a pause button and a return button for touch operation.

• 2Turn on and wait for work1Read the value after minutes of stabilization, (micrograms)/Cubic meters and units/Can be hung on the wall/handheld/Place it on the desktop for use.

• 3,Under voltage will automatically shut down, and the charging state can work continuously. The battery strip displays under voltage and can still work1About an hour, charging about2When fully charged within hours, the battery bar displays as full.

Precautions

• Before measurement, it is necessary to ensure instrument calibration to avoid errors. ‌
  

• To avoid startup testing in polluted environments, it is necessary to preheat the sensor to zero in a clean air environment. ‌
  

• Low temperature environments require an extended preheating time (recommended to be at least 15 minutes), while high temperature and high humidity environments may affect accuracy. ‌

• Wear protective equipment during operation to avoid direct contact with particulate matter