Operation instructions for ATP fluorescence detector

operating steps

1、Grasp the tube, take out a wet swab from the test tube, and apply it to the testing area. Insert the test piece into the detection tube,4Conduct testing within hours.

2、Grasp the suction valve, reverse the device, and pinch the ball tube with the thumb and middle finger of the other hand to break it from the suction valve. Gently squeeze the tube twice, squeeze out the liquid inside the tube, clean the specimen inside the detection tube, and shake gently two to three times.

3、Place the entire detection tube into the fluorescence analyzer, cover the lid tightly, and measure.

storage

1The detection tube needs to be stored in2－8Do not freeze in a refrigerator at ℃.

2Keep away from light and store in an aluminum film bag, seal and store.

3Please do not use reagents that have exceeded their shelf life.