Vibration full temperature incubatorThere are cold and hot air ducts inside the box, which ensure smooth gas circulation inside the box. In addition, the temperature control adopts advanced microelectronic control system, which improves the temperature control accuracy and greatly enhances the reliability of the instrument; The speed is controlled by advanced frequency conversion technology, and the motor is a brushless frequency conversion motor, which ensures stable and reliable oscillation frequency; The LED display displays "temperature" and "speed" respectively. The technology is advanced, the performance is stable and reliable, and the operation is convenient. It is an ideal cultivation device for scientific research and production in biotechnology, medicine, chemical industry, health, agriculture and forestry and other industries.

　　

The shaking full temperature incubator has multiple safety designs to ensure the safety of operators and samples.

　　

1. Optimized PID parameter settings will not cause temperature overshoot during the temperature rise and fall process.

　　

2. The fully optimized oscillation system and balance system can ensure that there will be no other unnecessary vibrations during high-speed oscillation.

　　

3. After an unexpected power outage, the shaking table will remember the user's set parameters and automatically start based on the original set parameters upon receiving a call, while also automatically reminding the operator of any unexpected situations that have occurred.

　　

4. If the user opens the cabin door during work, the shaking table oscillation plate will automatically brake flexibly until it stops oscillating. When the cabin door is closed, the shaking table oscillation plate will automatically start flexibly until it reaches the preset oscillation speed, and there will be no unsafe events caused by sudden speed increases.

　　

5. When a certain parameter deviates far from the set value, the sound and light alarm system will be automatically activated.

　　

6. After upgrading to a touchscreen control panel, the side is equipped with a data export USB port, which can easily export backup data and provide convenient and secure data storage.

　　

Instructions for using the shaking full temperature incubator:

　　

1. Usage conditions: Environmental temperature: 10-30 ℃; No strong light, no strong corrosive gases, good ventilation, relative humidity below 85%; Power supply: 200V ± 10%, 50HZ. Capacity not less than 1KW, equipped with a grounded power socket.

　　

2. Usage: Power on: Insert the three pin plug into the power socket, set the power switch on the panel to the "on" position, and the instrument will display a number indicating that the device has entered the working state.

　　

3. Set the experimental temperature according to the temperature setting method (temperature control manual attached), and start working after the temperature is constant.

　　

4. When oscillation is required, turn on the oscillation switch, press the △ and ▽ keys on the speed controller to set the speed, press the RUN key to turn on the RUN light, and the oscillation slowly starts to the set speed. During operation, you can press. Press the △ and ▽ keys to adjust the speed. To stop, press the stop button and the STOP light will turn on.