1. Overview

APM830 (hereinafter referred to as the instrument) is designed according to IEC international standards and has functions such as full power measurement, power statistics, power quality analysis, and waveform recording

Ability, event recording function (including voltage temporary rise and fall interruption, impulse current recording, etc.) and network communication function, mainly used for the comprehensive management of power supply quality in the power grid

Combined monitoring. This series of instruments adopts a modular design, combined with feature rich external DI/DO modules, AI/AO modules, TF card event recording modules

Network communication module, which can flexibly achieve full power measurement and switch status monitoring of electrical circuits. The combination of dual RS485 and Ethernet interfaces can achieve RS485

Copy the data from the main station, eliminating the need for a data switch. The PROFIBUS-DP interface can achieve high-speed data transmission and networking functions.

2. Product model specifications and functions

2.1 Model Features

Note: 1. When selecting extension functions, the instrument can carry up to 3 modules, which can be the same or different, but MCP \ \ MCE \ \ MLOG

Multiple identical modules cannot be selected to be combined together, MCP and MCE can only be selected as one.

2. When multiple modules are used in combination, the following installation sequence rules must be followed: (1) MCP MCE MCM: The installation sequence must be before other modules

Previously (i.e. installing this module first) (2) MD82 Mlog: The installation sequence must be after other modules (i.e. installing this module last).

Manufacturer's contact phone number 18706162823 (same as WeChat)

2.2 Technical Parameters

Manufacturer's contact phone number 18706162823 (same as WeChat)