Inductive liquid level transmitterMain features and technical parameters:

ZW-DBS601/602 seriesInductive liquid level transmitterA radio frequency induction liquid level instrument developed by introducing technology from similar foreign products. It has a compact structure, small volume, simple installation and maintenance, and uniform external dimensions. Multiple signal output forms facilitate different system configurations. Polytetrafluoroethylene probe, resistant to strong corrosive liquids such as acid and alkali, and high temperatures. The measuring part immersed in liquid only has one PTFE flexible wire or PTFE rod probe as a sensor, with high reliability. Fully sealed aluminum alloy casing and stainless steel connectors. There are multiple circuit structure modes for measuring and outputting both ends, as well as measuring, outputting, and power supply three end isolators, with built-in isolators to adapt to different signal grounding methods. Complete overcurrent, overvoltage, and power polarity protection.
Key Features:
1. Simple structure: without any movable or elastic components, therefore reliable and requires minimal maintenance.
2. Easy installation: The built-in structure particularly demonstrates this feature, requiring no tools.
3. Easy adjustment: The zero position and range potentiometers can be used to freely shift the zero position or change the range within the effective range of liquid level detection, and the two adjustments do not affect each other.
4. Widely used: Suitable for liquid level measurement in media with high temperature, high pressure, strong corrosion, etc.
Technical Specifications:
1. Effective detection range: 0-0.2-20m;
2. Accuracy: Level 0.5, Level 1, Level 1.5;
3. Pressure range: negative pressure, normal pressure, high pressure below 32MPa;
4. Working temperature: -50~240 ℃;
5. Environmental temperature: -20~75 ℃;
6. Applicable medium: acid, alkali, salt or any medium that is non corrosive to polytetrafluoroethylene;
7. Output signal: 4-20mA, two-wire system;
8. Power supply: Load resistance 0-750 Ω DC24V;
9. Fixed method: thread installation M20 × 1.5, M27 × 2 flange installation DN15, DN25, DN50, DN80;
10. On site display: analog display 0-, digital display, on-site depth.