-
E-mail
zhangbd@keyontechs.com
-
Phone
18317143469
-
Address
No. 7 Xinghao Road, Fengjing Industrial Park, Jinshan District, Shanghai
Shanghai Keyang Technology Co., Ltd
Briefly describe the correct usage method of A+K electromagnetic flowmeter
Date: 2025-07-22Read: 13
The A+K electromagnetic flowmeter utilizes Faraday's law of electromagnetic induction to calculate flow velocity and flow rate by detecting the induced electromotive force generated when the fluid passes through a magnetic field. It is crucial to master the correct installation and usage methods in order to ensure the provision of accurate and reliable measurement data. This article will provide a detailed introduction to the correct usage of the A+K electromagnetic flowmeter.
1、 Correct installation position and method
straight pipe section requirements
To ensure measurement accuracy, there should be sufficient straight pipe lengths upstream and downstream. It is usually recommended to have a straight pipe section with at least 5 times the diameter of the pipeline upstream and a straight pipe section with at least 3 times the diameter of the pipeline downstream to reduce the impact of turbulence and eddies.
Avoid sources of interference
When installing, try to stay away from strong electromagnetic interference sources (such as high-power motors, transformers, etc.) and avoid getting close to vibration sources. If unavoidable, shielding measures can be taken or isolation devices can be added.
Vertical or horizontal installation
For applications containing suspended particles or viscous liquids, it is recommended to use a vertical installation method to allow the fluid to flow from bottom to top and prevent sediment accumulation. For cleaning liquids, horizontal installation is also a common choice.
2、 Daily operation precautions
Pre startup inspection
Before starting the A+K electromagnetic flowmeter, it is necessary to check whether the power connection is correct and whether the grounding is good. Simultaneously confirm that there is no foreign object blockage inside the sensor and that the pipeline is filled with the fluid to be measured.
Parameter Settings
Reasonably set the various parameters of the converter according to actual application requirements, including unit system, output signal type, alarm limit, etc. Some functions such as cumulative total record and historical data query also need to be configured according to specific situations.
periodic calibration
To ensure long-term accuracy, it is recommended to perform calibration once a year. You can contact the manufacturer or authorized service agency for professional calibration, or use standard flow meters for on-site comparison and calibration.