304 stainless steel chain code/cyclic chain code/winch chain code verification device

304 stainless steel chain code/cyclic chain code/winch chain code verification device

Ordinary chain codes are convenient and flexible to use. One chain code can calibrate multiple scales, but each time it needs to be transported and assembled on site. After calibration, it also needs to be disassembled and stored, which brings some inconvenience to use. In order to solve the inconvenience of use, the chain code retraction and hoisting device is easy to operate and does not occupy space. When using, the chain code is put down and the chain code is retracted after calibration, which is both safe and reduces tedious work, significantly improving efficiency. Compared with the "physical verification device", the chain code hoisting device can save hundreds of thousands of yuan. It has been widely used in electronic belt scales for calibration and verification, with convenient use, high measurement accuracy, long service life, and economic benefits.

The verification chain code of the belt scale is an important link to ensure the accuracy and reliability of the belt scale. Chain code, as a standard weight measurement tool, has the characteristics of high accuracy, high stability, and reusability, and is therefore widely used in the calibration process of belt scales.

When performing belt scale calibration, the chain code needs to be placed on the weighing area of the belt scale first, and then the parameters and calibration equipment of the belt scale need to be adjusted to make the reading of the belt scale match the standard weight of the chain code. This process requires precise control of factors such as speed, tension, and bias load of the belt scale to ensure its accuracy and stability under different working conditions.

The importance of verifying the chain code of the belt scale lies in its ability to not only improve the measurement accuracy of the belt scale, but also extend its service life. If the belt scale is not regularly calibrated, its accuracy may gradually decrease due to various factors, and even lead to error accumulation, thereby affecting the accuracy and stability of the production process. Therefore, regular calibration and maintenance of belt scales are crucial.

In practical applications, the verification chain code of belt scales also needs to consider the special requirements of different industries and scenarios. For example, in certain industries that require high-precision measurements, it may be necessary to use higher precision chain codes for verification; In some harsh working environments, it may be necessary to choose a more durable and stable chain code to ensure the long-term stable operation of the belt scale.

In short, the verification chain code of the belt scale is an important means to ensure the accuracy and reliability of the belt scale. It can not only improve the measurement accuracy of the belt scale, but also extend the service life of the belt scale, providing a solid guarantee for the production and development of enterprises. Wait for status, after a long time, the display will appear100.000gTake it to calibrate the weight, the display should show0.000gIf it is not zero, reset it again and repeat the above calibration operation.

Calibration method for balance weights: Set the balance to zero position and then hold it down continuously“CAL”Key untilCALintUntil the occurrence, the following situations will be displayed during calibration: the balance is set to zero, the internal calibration weights are loaded, the balance is rechecked for zero position, the balance reports the calibration process, the balance reports calibration is complete, and the balance automatically returns to the weighing state.

The balance weight adopts the principle of electromagnetic force automatic compensation circuit. When the scale plate is loaded(Be careful not to exceed the weighing range)Electromagnetic force will push the scale back to its original equilibrium position, balancing the electromagnetic force with the weight of the object being weighed. As long as the weighing size is within the allowable range, the impact on the balance is minimal and will not affect the accuracy of the electronic balance due to long-term weighing

304 stainless steel chain code/cyclic chain code/winch chain code verification device