Product Introduction:

FS-30-T | FS-30-D PortableDigital display tube corrosion pit depth measuring instrumentIt is easy to use and can directly display readings. It is mainly used for measuring the depth of local wall thinning and corrosion pits on the heated surface of pipes caused by wear and corrosion. It can also be used for measuring the depth of small holes in mold injection molding, mechanical processing, and vessel manufacturing.

The pit depth gauge is easy to use and can directly display readings

Product Features

1. Large screen display, intuitive reading.

2. Used to detect the depth of small holes.

3. Compact and portable, easy to measure, and simple to operate.

4. Connect to the computer to collect data (customization required).

5. Reset to any position, convert between metric and imperial systems, and reset to zero.

6. The measuring base adopts a U-shaped door design, which makes it easier to observe the position of the measuring needle during measurement.

7. The measuring base laser has marked the reference line of the scale, making it convenient for users to roughly locate the measurement position when needed.

Technical Specifications:

Display mode: digital display

Measurement range: 0-30mm

Resolution: 0.01mm

Measuring rod diameter: φ 1.5mm

Measurement base size: 50mm

Power supply: 1.5V button battery

Working conditions:

Temperature: 0 ° C~+40C

Relative humidity:<80%

Storage and transportation temperature: -10 ° C~+60 ° C

Digital display tube corrosion pit depth measuring instrumentUsage:

1. Loosen the locking screw, press the power button to start the power supply, and check if the display screen and all keys work abnormally.

2. Convert by unit and select the mm/inch unit system.

3. Move the ruler frame so that the end face of the measuring rod is flush with the measuring base surface, press the reset button to reset, and the measurement can be performed.

When the measuring base surface is not long enough, an extended base surface can be selected to be used in conjunction with the extended base hole for fixation.

FS-30T|FS-30DDigital display tube corrosion pit depth measuring instrumentNotes:

1. This product is a precision measuring tool. When using it, be careful to handle it gently to prevent impact and loss of accuracy.

2. To prevent liquid substances such as oil and water from wetting the protective film, it is forbidden to apply voltage on the ruler to avoid damaging the circuit.

When not in use for more than one month, the battery should be removed.

Digital corrosion pit depth measuring instrumentStandard configuration: instrument box, pit depth gauge, one battery, certificate of conformity, warranty card, instruction manual.