The synthetic blood penetration tester for medical protective clothing is mainly suitable for testing the resistance of protective clothing to synthetic blood penetration under different levels of test pressure.

protective clothingWhat are the uses of synthetic blood penetration testers

The protective suit synthetic blood penetration tester is suitable for measuring the resistance of daily work clothes, surgical gowns, isolation gowns, and protective suits to synthetic blood penetration under different levels of test pressure.

The testing principle of the synthetic blood penetration tester for protective clothing:

Under continuous pressure, synthetic blood is used to test the protective clothing material and visually inspect the penetration of the synthetic blood on the material.

protective clothingApplicable standards for synthetic blood penetration tester:

GB19082-2009 Technical Requirements for Medical Disposable Protective Clothing - Synthetic Blood Penetration Test Method

YY0700-2008 Blood and Fluid Protective Equipment, Protective Clothing Materials, Resistance to Blood and Fluid Penetration Test, Synthetic Blood Test Method

ISO16603:2004 Blood and body fluid protective equipment, protective clothing materials, testing of resistance to blood and body fluid penetration, synthetic blood test method

ASTMF1670, ASTMF1671

protective clothingMain parameters of the synthetic blood penetration tester:

1. Use a gas source that can provide a pressure of (20 ± 1) kPa to continuously pressurize the sample, without being limited by the space of the testing site;

2. It has a pressure gauge to display the pressure, and the pressure can be adjusted;

3. Use pressurized medium: compressed air;

4. The specially designed stainless steel penetration test slot ensures a firm grip on the sample and prevents synthetic blood from splashing around;

5. Square metal blocking mesh: open space ≥ 50%; Bending ≤ 5mm at 14kPa;

6. Digital timer with an accuracy of ± 0.01min;

7. Equipped with clamps that can generate 13.5N • M torque.

protective clothingCharacteristics of Synthetic Blood Penetration Testing Instrument

1. The instrument uses a gas source that can provide a pressure of (20 ± 1) kPa to continuously pressurize the sample, without being limited by the space of the testing site.

2. The instrument is equipped with a pressure gauge to display the pressurization pressure, which can be adjusted.

3. Use pressurized medium: compressed air.

4. The specially designed stainless steel penetration test slot ensures a firm grip on the sample and prevents synthetic blood from splashing around.

5. Square metal barrier mesh: open space ≥ 50%; Bending ≤ 5mm at 20kPa.

6. Digital timer with an accuracy of ± 1 second.

7. The instrument has a clamp that can generate a torque of 13.5Nm.

8. The instrument structure is the same as the 'schematic diagram of test instruments' and' test slot structure 'in GB19082-2003 standard.