DN50 stainless steel single flange level gauge

TRD600 series immersion type liquid level transmitter

lProduct Overview:

The TRD600 series products can be divided into integrated, split, anti-corrosion, rod type liquid level transmitters, and intelligent liquid level controllers, and are currently commonly used liquid level measuring instruments. The product accurately measures the static pressure of the liquid level proportional to the depth of the liquid level through a high-performance pressure sensor and converts it into a standard signal output,Can be directly connected to secondary display control instruments, intelligent instruments, orConnect PLC and other components.Easy to install, simply insert liquid medium to measure the liquid level height from the top of the transmitter to the liquid surface. Among them, the intelligent liquid level controller can output one analog signal and four switch signals to achieve control functions. At present, this series of products has been widely used in liquid level measurement and control in the fields of petroleum, chemical, power plants, urban water supply, and hydrological exploration.

lTechnical Specifications:

overload≤ 1.5 times the rated range

Accuracy level:0.2, 0.5

Long term stability:0.2% FS/year

Operating Temperature-20℃～80℃

Storage temperature:-20～100℃

Protection level: SensorIP68 wiring: IP65

Power supply:24VDC 220VAC (optional liquid level controller)

output:4-20mA (two-wire) 1-5V 0-10V (three wire)

Load resistance:≤(U-15)/0.02Ω

Relative humidity:95% non condensing

Temperature impact: every change in ambient temperature10 ℃, output variation ≤ ± 0.05% of range,

Annual drift<±0.3％

Material of process connectors:316 stainless steel 0Cr18Ni9 stainless steel polyethylene gas conducting cable

The anti-corrosion type connection material is PTFE ceramicsPTFE gas conducting cable

lInstallation Guide:

1.When installing the TRD600 series immersion type liquid level transmitter in a stationary deep well or water tank, a steel pipe with an inner diameter of about 45mm is usually used (several small holes are drilled at different heights to allow water to enter the pipe smoothly), and then the immersion type liquid level transmitter is placed into the steel pipe for use.

2. The installation direction of the transmitter is vertical, and the installation position of the immersion type should be far away from the liquid inlet and outlet and the agitator.

3. In situations where there is significant vibration, steel wire can be wrapped around the transmitter to reduce vibration and prevent cable breakage.

When measuring flowing or stirred liquids, a steel pipe with an inner diameter of about 45mm (with several small holes drilled at different heights on the opposite side of the liquid flow direction) is usually fixed in the water. Then put the immersion type liquid level transmitter into the steel pipe and it can be used.

Note: Due to differences in instrument configuration and functionality, there may be significant deviations between the reference price and the actual price. For accurate pricing and delivery time, please consult our sales consultant by phone. Thank you!