The flood control and drainage pump truck adopts a containerized mechanical seal, which uses independent lubrication and cooling chambers. The cooling chamber is lubricated with oil and maintains a pressure of 2 bar; The pump truck adopts a 4-wheel or 2-wheel alloy steel chassis frame, a hard steel plate soundproof cover, and is equipped with a trailer frame; Equipped with a lighting system that can adapt to night work.
The equipment of the flood control and drainage pump truck is an integrated driving power, which can be used for emergency drainage and rescue in areas without power supply. When the equipment arrives at the site, the installed control system can be used to start the engine and drive the pump to pump fluid, which is convenient and fast. Each set of equipment is independently movable and does not require any auxiliary engineering; Mobile operation, arriving at any time; High displacement or long-distance transportation; Single person installation and operation in a short period of time; No additional power supply or lifting equipment required; No complex maintenance and upkeep.
The flood prevention and drainage pump truck does not need to vacuum or use other methods to assist in pumping water. After inserting the pumping pipe into the desired pumping location, the pump can be quickly and directly started to pump and drain water. The control system is centrally controlled by purchasing integrated panels. The product is widely used for agricultural irrigation and aquaculture; Various temporary pumping occasions; Industrial and municipal drainage for cofferdam pumping; The technical parameters are 500-7000m3/h, suction stroke: 5-8m, head: 5-15m; the coarse shaft of the rotary pump adopts a non stepped design, and the structure conforms to the advanced characteristics of flood control and drainage pump trucks.

Overview of ZW flood and drought resistant pump:1.1 The system is flexible and maneuverable; The device integrates driving power and can be used for emergency drainage and rescue in areas without power supply. When the equipment arrives at the site, the installed control system can be used to start the engine and drive the pump to pump fluid, which is convenient and fast. Equipped with a lighting system that can adapt to night work.1.2 Main features: Each set of equipment is independent and movable, without any auxiliary engineering required; Mobile operation, arriving at any time; High displacement or long-distance transportation; Single person installation and operation in a short period of time; No additional power supply or lifting equipment required; No complex maintenance and upkeep.1.3 Applicable occasions: areas without power supply; Assault flood control and drainage; Drought resistance and emergency rescue; Agricultural irrigation and aquaculture; Various temporary pumping occasions; Industrial and municipal drainage for cofferdam pumping.1.4 The main supporting products of the entire system include domestic and foreign diesel engines and Yuan'er brand high flow pumps.

2. Technical requirements for ZW flood and drought resistant pump:2.1 Technical parameters: 500-7000m ³/h, suction lift: 5-8m, lift: 5-15m2.2 Drive: Electric starting diesel engine, equipped with fuel gauge and oil alarm device;2.3 Pump:(1) There is no need to evacuate or use other methods to assist in pumping water. After inserting the pumping pipe into the desired pumping location, the pump can be quickly and directly started to pump and drain water.(3) Adopting a containerized mechanical seal, the mechanical seal adopts independent lubrication and cooling chambers, the cooling chamber adopts oil lubrication, and the cooling chamber maintains a pressure of 2 bar;(5) The axis deviation shall not exceed 0.003 millimeters;(6) The coarse shaft of the rotary pump adopts a stepped design with a diameter not less than 85 millimeters to reduce shaft offset and extend service life;(7) The pump ensures that the rotor operates for a long time under the rigid support at both ends, and the support at both ends is equipped with mechanical seals to ensure that the bearings do not come into contact with the conveyed material. Ensure that the shaft is not offset and reduce the wear of the rotor and related components.2.4 Pumping capacity: Ordinary plastic bags, textile bags, mud, hair and other debris can be smoothly pumped through without blocking the pump body;2.5 Pipe fittings: imported metal skeleton rubber pipe, outlet hose, and equipped with quick couplings; (Length according to user requirements)2.6 Pump truck: equipped with a 4-wheel or 2-wheel alloy steel chassis frame, a hard steel plate soundproof cover, and a trailer frame;2.7 Control System: Purchase integrated panels for centralized control.