Online viscometer

1、working principle

Online viscometer uses the principle of vibration. Due to the free vibration of the cone at the center frequency, the viscosity is proportional to the amplitude of the vibration. Therefore, the voltage value of the amplitude is detected, and the viscosity of the liquid can be measured through calibration methods; Further temperature compensation can eliminate temperature drift in the system.

2. Application industry

Mainly used for controlling and measuring chemical production processes such as paint, crude oil, dairy products, adhesives, etc.

3. Installation method

Suitable for various installation methods such as pipeline installation or container wall insertion installation, both dynamic and static can be measured, and installation methods include flange and clamp. Installation kits can be designed according to specific working conditions.

1. Adopting a 4-wire transmission system with 4-20mA output and RS485 Modbus RTU communication.

2. Viscosity value 0-1000 Display（1~2Decimal places); Real time temperature indication.

3. Can directly enter the instrument menu on-site to set parameters and debug, easy to operate.

4. Measurement value fine-tuning and temperature compensation function.

5. Online real-time measurement, can be directly used for production process control.

6. The material of the liquid components in contact is customized according to requirements.

1Signal mode: 4-wire system

2Output signal: 4~20mA (active output)/485 communication

3electricity Source: 24VDC (external resistance components cannot be loaded or connected in series with PLC)

4Viscosity range: 050000mpa. sAccording to usage, it can be calibrated as a certain range segment

5Viscosity accuracy: 1% Resolution:0.1, repeatability: 1

6working pressure: <1Mpa

7Medium temperature: 0-60 ℃ (liquid) ambient temperature: -40~85 ℃

1Electrical interface:M20X1.5

2Process interface: Various specifications of flanges and clamps

3Liquid receiving components:316LStainless steel, with special requirements

Ø(Ordering instructions for flow rate, temperature, and measurement range)