The maintenance of liquid turbine flowmeter is divided into four steps

Liquid turbine flowmeterAdopting an integrated design of temperature and pressure compensation, it is more robust and has a longer lifespan than traditional liquid turbine flow meters. And it is very safe and can be placed in various harsh environments, such as swamps, sewers, etc. It can achieve seamless functionality in any environment, truly realizing integrated functionality. This type of flow meter is developed from liquid turbine flow meters, inheriting and developing the advantages of ordinary liquid turbine flow meters, and improving their disadvantages of low accuracy and susceptibility to environmental changes, becoming more stable.

Liquid turbine flowmeterMaintenance steps

1. Adjust the liquid turbine flowmeter as required (fill the liquid turbine flowmeter with an appropriate amount of water and level it)

2. Refer to the wet flowmeter calibration system diagram, connect the standard volumetric flask, water cup, and liquid turbine flowmeter, and add a certain amount of water to the water cup.

3. Open plug 5 and rotate plug 6 to allow air from the standard volumetric flask to enter the flow meter. When the flow meter pointer reaches the integer value, rotate plug 6 to allow the air in the standard volumetric flask to communicate with the atmosphere.

4. Rotate plug 6 to connect the air inside the standard volumetric flask with the flow meter. After opening plug 5, the air inside the flask flows into the flow meter again. When the water level rises to scale I, close plug 5. Read the flow meter reading and fill it in the record sheet.