-
E-mail
30065778@QQ.com
-
Phone
18918225919021-31121802
-
Address
2nd Floor, Building 5, No. 319 Tongli Road, Jiufu Development Zone, Songjiang District, Shanghai
Product Categories
- Fat analyzer
- Infrared instrument
- TR transmittance and reflectance tester
- Accessories and consumption of photometer
- Residual chlorine analyzer
- Fully automatic nitrogen concentrator
- Digital vertical optical meter
- SPE
- Nitrogen blowing instrument
- Reflection tester
- uv-vis
- Dual beam UV visible spectrophotometer
- Visible spectrophotometer
Shanghai Spectral Analysis Instrument Co., Ltd
12 hole dry nitrogen blower
NegotiableUpdate on 12/15
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Dry nitrogen blowing instrument product description: Shanghai Spectrum independently developed dry nitrogen blowing instrument is mainly used for concentration or preparation of large quantities of samples
Product Details
Dry nitrogen blower
Product Description:
Shanghai Spectrum independently developed dry nitrogen blowing instrumentMainly used for concentration or preparation of large quantities of samples. Through microcomputer control technology, high-purity aluminum material is used as the heating medium to achieve more accurate temperature control and a wide temperature control range. Its working principle is to blow nitrogen into the surface of the heated sample, causing the solvent in the sample to evaporate and separate quickly, thereby achieving the goal of oxygen free concentration of the sample and keeping it purer.
Main features:
1. The blowing needles are independent of each other to avoid cross contamination.
2. The height of the air chamber can be adjusted, and the standard needle length is 150mm.
3. The dry nitrogen blower has 12 airway control switches, which do not waste gas.
4. When concentrating toxic solvents, the entire system can be placed in a fume hood.
5. Built in over temperature protection device, automatic fault detection and alarm function.
6. LED display screen, temperature synchronous display, time decreasing display, easy and convenient operation.
Technical Specifications:
Optional modules:
Product Description:
Shanghai Spectrum independently developed dry nitrogen blowing instrumentMainly used for concentration or preparation of large quantities of samples. Through microcomputer control technology, high-purity aluminum material is used as the heating medium to achieve more accurate temperature control and a wide temperature control range. Its working principle is to blow nitrogen into the surface of the heated sample, causing the solvent in the sample to evaporate and separate quickly, thereby achieving the goal of oxygen free concentration of the sample and keeping it purer.
Main features:
1. The blowing needles are independent of each other to avoid cross contamination.
2. The height of the air chamber can be adjusted, and the standard needle length is 150mm.
3. The dry nitrogen blower has 12 airway control switches, which do not waste gas.
4. When concentrating toxic solvents, the entire system can be placed in a fume hood.
5. Built in over temperature protection device, automatic fault detection and alarm function.
6. LED display screen, temperature synchronous display, time decreasing display, easy and convenient operation.
Technical Specifications:
| Model XPN100-1 | Dry nitrogen blower |
| temperature range | Room temperature+5 ℃~150 ℃ |
| timing range | Up to 99 hours and 59 minutes |
| temperature control accuracy | ≤±0.5℃ |
| display precision | ±0.1℃ |
| Temperature uniformity @ 100 ℃ | ≤±0.5℃ |
| Temperature uniformity @ 150 ℃ | ≤±1℃ |
| Heating time (40~150 ℃) | ≤30min |
| Maximum lifting stroke | 200mm |
| Standard module | 1 MK05 test tube with a diameter of 16mm |
| Maximum gas pressure | 0.02MPA (applicable for test tube diameter ≤ 16) 0.05MPA (applicable for test tube diameters>16) |
| Maximum gas flow rate | 15L/ min |
| Needle length | 150mm (applicable for test tube diameter ≥ Φ 10mm) 80mm (applicable for test tube diameter<Φ 10mm) |
| number of modules | 1 piece |
| heating power | 150W |
| fuse | 250V 3A Φ5*20 |
| Overall dimensions | 280mm*240mm*500mm |
| weight | 7KG |
Optional modules:
| model | Test tube diameter | Number of test tubes |
| MK01 | 10mm | 12 |
| MK02 | 12mm | 12 |
| MK03 | 13mm | 12 |
| MK04 | 15mm | 12 |
| MK05 | 16mm | 12 |
| MK06 | 19mm | 12 |
| MK07 | 20mm | 8 |
| MK08 | 26mm | 8 |
| MK09 | 1.5ml | 12 |
| MK10 | 2.0ml | 12 |
Similar Product Recommend