2FRM5 Rexroth type speed regulating valve

NegotiableUpdate on 02/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

2FRM5 type two-way flow control valve with a diameter of 5, pressure up to 21MPa and flow up to 15L/min - optional pressure compensator stroke limiter - can avoid overshoot - equipped with a lock manual knob - controls flow in both directions with a rectifier overlay plate. 2FRM type flow control valve is a two-way flow control valve

Product Details

2FRM5 type two-way flow control valve

Diameter 5, pressure up to 21MPa, flow up to 15L/min

——Optional pressure compensator stroke limiter

——Can avoid overshoot

——Manual knob with lock

——Control the flow in two directions using a rectifier overlay board

The 2FRM type flow control valve is a two-way flow control valve.

This valve is used for throttling and is not affected by pressure and temperature.

This type mainly includes a valve body (1), control components (2), throttling fluid (3), optional pressure compensator with stroke limiter (4), and one-way valve

Valve (5) is used to throttle the flow from A to B at the throttle port (6). Adjusting the column pin (7) can change the throttle section. Connect the pressure compensator,

In order to maintain a constant flow rate at the orifice (8), unaffected by pressure. The throttling port is designed as a sharp edged hole, so throttling is not easily affected by temperature.

Through the one-way valve (5), the oil can freely flow back from B to A.

In order to control the flow through the flow control valve in two directions, a Z4S5-10/type rectifier overlay plate can be configured under the flow control valve.