5000N single column tensile testing machine

The WY-8202A5000N single column tensile testing machine adopts fully digital force and displacement dual closed-loop control during the testing process. It uses a servo drive system, precision ball screw transmission, high-precision sensors, and a new generation of measurement and control system to effectively ensure the measurement accuracy and stability of the product

---

WY-8202A 5000N single column typetensile testing machineFull digitalization is adopted during the testing processpower、displacementdual-loop controlBy adopting a servo drive system, precision ball screw transmission, high-precision sensors, and a new generation of measurement and control system, the measurement accuracy and stability of the product are effectively guaranteed.
Single column tensile testing machineMainly used for detecting metal and non-metal material productsstretch、Anti compression、peel off、tear、anti-bending、Three point anti bending、Anti shearWaiting for physical performance. At the same time, testing and data processing can be conducted according to various standards provided by GB, ISO, JIS, ASTM, DIN, and users.
This machine is widely used for material inspection and analysis in industries such as hardware tools, fasteners, automotive and motorcycle parts, aerospace, wire and cable, rubber and plastic, paper packaging, etc. It is an ideal testing equipment for research institutes, colleges and universities, industrial enterprises, technical supervision, commercial inspection and arbitration departments.
Single column tensile testing machineTechnical Specifications:
1. Maximum test force: 5000N;
2. Accuracy level: 0.5 level;
3. Load measurement range: 0.5% -100% FS;
4. Allowable error limit for test force indication: within ± 1% of the indication;
5. Resolution of test force indication: 1/± 500000 of the maximum test force;
6. Sampling frequency: 400 times/second;
7. Deformation measurement range: 0.2% -100% FS;
8. Limit of deformation indication error: within ± 0.50% of the indication;
9. Deformation resolution: 1/8000 of the maximum deformation
10. Limit of displacement indication error: within ± 0.5% of the indication;
11. Displacement resolution: 1.0 µ m
12. Displacement speed adjustment range: 0.01-500mm/min
13. Displacement rate control accuracy: within ± 1.0% of the set value;
14. Effective test width: 115mm (left and right unrestricted)
15. Effective stretching space distance: 950mm (without installing test fixtures)
16. Host dimensions (length x width x height): 605 x 405 x 1800 (mm)
17. Power supply: single-phase 220V 50Hz 1kW;
18. Machine weight: approximately 180kg;
Features of control and data processing software functions:
1. Advanced chip integration technology, professionally designed data acquisition and amplification system, with advantages such as high integration, stability and reliability, and easy use. Control software can achieve automatic calculationmodulus of elasticity、yield strength、tensile strength、Fracture strength and elongationWaiting for detection data,Open formula editingIt can automatically calculate the force, stress, displacement, deformation and other data results of any specified point during the experimental process. The control and data processing of the experimental process comply with the requirements of the corresponding national standards for metallic and non-metallic materials.
2. Control method:Control methods such as fixed speed, positioning displacement, and fixed load can be selected;
3. Automatic zeroing: After the experiment begins, the measurement system automatically resets to zero;
4. Automatic shifting: automatically switches to the appropriate range according to the load size to ensure the accuracy of measurement data;
5. Automatic saving: Test data and conditions are automatically saved to prevent data loss caused by forgetting to save them;
6. Batch test: For samples with the same parameters, a batch of tests can be completed sequentially after one setting;
7. Display mode: Data and curves are dynamically displayed during the experimental process;
8. Curve traversal: After the experiment is completed, the curve can be reanalyzed by using the mouse to find the data corresponding to each point on the experimental curve;
9. Curve selection: stress-strain, force displacement, force time, displacement time and other curves can be selected for display and printing;
10. Unit switching: Force units: (g, kg, N, lb), stress units: (kg/mm2, N/mm2, Mpa, lbf/in2), displacement units: (m, mm, in)
11. Test report: The test report can be programmed and printed in the format required by the user, and can be exported as a WORD or EXCEL file;
12. Security protection: When the maximum load exceeds 2-10%, automatic security protection is implemented;
13. It can automatically detect and calculate the mechanical performance indicators of the sample, and can also manually intervene in the analysis process. According to the requirements of relevant standards, the automatic analysis results can be corrected to improve the accuracy of the data;
Random standard accessories:
1. Load sensor:MKCELLS from the United StatesHigh precision load element, choose any one within 5000N;
2. Displacement sensing system: high precisionoptical encoderOne set of induction displacement encoder for the entire process;
3. Data extraction card: one TH2000 measurement control motherboard;
4. Test software: One set of TM2101 English/Chinese Simplified/Traditional Three in One Measurement and Control System;
5. Power system:Communication servo motor and control drive systema set;
6. Transmission system:ItalyHaitecA set of gearbox and Taiwan precision screw drive;
7. Test fixture: Develop a set of test fixtures based on customer samples;