Horizontal photovoltaic cell tensile testing machine

Overview of Horizontal Photovoltaic Cell Tensile Testing Machine: Model: WY-3020S Tensile Testing Machine adopts fully digital force, displacement, and speed three loop control during the testing process. It uses Taiwan AC servo motor and control drive system, combined with Italian Haitec gearbox and Taiwan TBI precision ball screw transmission, to achieve the best transmission efficiency and signal-to-noise ratio

---

Horizontal photovoltaic cellstensile testing machinesummary:

Model: WY-3020S
tensile testing machineDuring the testing process, a fully digital force, displacement, and speed three loop control system was adopted, using Taiwanese AC servo motors and control drive systems, combined with Italian Haitec gearboxes and Taiwanese TBI precision ball screw transmissions, to achieve the best transmission efficiency and signal-to-noise ratio.

thattensile testing machineMainly used for testing mechanical tests such as stretching and peeling of solar cells, and can also be tested and data processed according to various standards provided by GB, ISO, JIS, ASTM, DIN, and users.

Horizontal photovoltaic cell tensile testing machineparameter

1. Test force selection: 10N, 20N, 50N, 100N, 200N;

2. Accuracy level: better than level 0.5;

3. Load measurement range: 0.2% -100% FS;

4. Allowable error limit for test force indication: within ± 0.5% of the indication;

5. Resolution of test force indication: 1/± 500000 of the maximum test force;

6. Deformation measurement range: 0.2% -100% FS;

7. Limit of deformation indication error: within ± 0.50% of the indication;

8. Deformation resolution: 0.0001mm

9. Limit of displacement indication error: within ± 0.5% of the indication;

10. Displacement resolution: 0.0005mm

11. Range of force control rate adjustment: 0.01-10% FS/S;

12. Accuracy of force control rate control: within ± 1% of the set value;

13. Deformation rate adjustment range: 0.02-5% FS/S;

14. Deformation rate control accuracy: within ± 1% of the set value;

15. Displacement speed adjustment range: 0.001-500mm/min

16. Displacement rate control accuracy: within ± 1.0% of the set value when the rate is less than 5mm/min; When the speed is ≥ 5mm/min, within ± 0.5% of the set value;

17. Constant force, constant deformation, constant displacement control range: 0.5% -100% FS;

18. Constant force, constant deformation, and constant displacement control accuracy: within ± 0.1% of the set value when the set value is ≥ 10% FS; When the set value is less than 10% FS, within ± 1% of the set value;

19. Effective test width: 200 x200mm

20. Effective stretching space distance: 350mm

21. Overall dimensions of the host (length x width x height): 850 x 300 x 250 (mm)

22. Power supply: single-phase 220V 50Hz 500W;

23. Machine weight: approximately 50kg;

Horizontal photovoltaic cell tensile testing machineFeatures of control and data processing software functions:

1. Advanced chip integration technology, professionally designed data acquisition and amplification system, with advantages such as high integration, stability and reliability, and easy use. The control software can automatically obtain detection data such as tensile strength, yield strength, compressive strength, fracture strength, peel strength, elastic modulus, elongation, etc. Open formula editing can automatically calculate the force, stress, displacement, deformation and other data results of any specified point during the test process. The control and data processing of the experimental process comply with the requirements of the corresponding national standards for metallic and non-metallic materials.

2. Control methods: Optional control methods include constant speed, positioning displacement, constant load, constant load rate, constant stress, constant stress rate, constant strain, and constant strain rate;

3. Automatic zeroing: After the experiment begins, the measurement system automatically resets to zero;

4. Automatic shifting: automatically switches to the appropriate range according to the load size to ensure the accuracy of measurement data;

5. Automatic saving: Test data and conditions are automatically saved to prevent data loss caused by forgetting to save them;

6. Batch test: For samples with the same parameters, a batch of tests can be completed sequentially after one setting;

7. Display mode: Data and curves are dynamically displayed during the experimental process;

8. Curve traversal: After the experiment is completed, the curve can be reanalyzed by using the mouse to find the data corresponding to each point on the experimental curve;

9. Curve selection: stress-strain, force displacement, force time, displacement time and other curves can be selected for display and printing;

10. Unit switching: Force units: (g, kg, N, lb), stress units: (kg/mm2, N/mm2, Mpa, lbf/in2), displacement units: (m, mm, in)

11. Test report: The test report can be programmed and printed in the format required by the user, and can be exported as WORD, EXCEL, or PDF files;

12. Test data: Powerful result data query function, allowing historical test records to be queried at any time through the database;

13. Security protection: When the maximum load exceeds 2-10%, automatic security protection is implemented;

14. It can automatically detect and calculate the mechanical performance indicators of the sample, and can also manually intervene in the analysis process. According to the requirements of relevant standards, the automatic analysis results can be corrected to improve the accuracy of the data;

Standard accessories for testing machine:

1. Load sensor: MKCELLS high-precision load cell from the United States, with 5/6/9/12 sensors available within 200N;

2. Displacement sensing system: one set of high-precision photoelectric encoder for sensing full range displacement encoder;

3. Data acquisition card: one 64 bit closed-loop measurement and control motherboard;

4. Testing software: One set of English/Simplified Chinese/Traditional Chinese three in one measurement and control system;

5. Power system: One set of Taiwan AC servo motor and control drive system;

6. Transmission system: One set of Italian Haitec gearbox and Taiwan TBI precision ball screw;

7. Test fixture: One set of specialized testing fixtures for 180 degree peeling of multi station battery cells;