A-series variable piston pump single pump, pressure compensation control type

A-series Variable Piston Pump · Single Pump, Pressure Compensation Control Type Parameters

1. When setting the pressure, it is necessary to ensure that the fully trapped pressure does not exceed the maximum allowable working pressure.

2. When the pump is used above its rated value, the working conditions of the pump should be limited. For example, if used in the working situation shown in the right figure, the maximum flow operation time should be limited to 1/5 of one cycle and less than 6 seconds. This condition can vary according to the actual working pressure and flow rate (inclination angle of the inclined plate). Please contact us for details.

3. Quality representation A10-FR01B within ()

　2、 Model Description

1. A16-A56 type

A16-A56 Model Description

2. A10 type, A70~A145 type

A10 type, A70~A145 model description

　　3、 Pipe flange component

A-series Variable Piston Pump · Single Pump, Pressure Compensation Control Type Pipe Flange Component

The working pressure of the plug-in welding type is limited to low pressure based on the strength of the flange. When selecting the plug-in welding type for the output port, attention should be paid to the maximum working pressure of each pipe flange.

To purchase the "A-series Variable Piston Pump · Single Pump, Pressure Compensation Control Type" product, please call the company phone number to learn more about the product details. You can browse this webpage carefully.