A5-05M laboratory planetary ball mill 001

NegotiableUpdate on 01/02

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

1. The A5-05M series planetary ball mill can be used to finely grind or mix solid particles, suspensions, and pastes with different particle sizes and materials using both dry and wet methods

Product Details

1. Purpose:

The A5-05M series planetary ball mill can finely grind or mix solid particles, suspensions, and pastes with different particle sizes and materials using both dry and wet methods. If a vacuum ball milling jar is used, the sample can be ground and mixed in vacuum or inert gas. After many scientific research and use by enterprises, the particle size of the A5-05M series planetary ball mill grinding material produced by our company can fully reach the nanometer level. According to user feedback, it has reached about 30 nanometers (0.03 μ m). This series of ball mills is widely used in fields such as geology, metallurgy, soil, building materials, chemical industry, light industry, medicine, electronics, ceramics, batteries, and environmental protection.

2. Working principle

The A5-05M series planetary ball mill is equipped with four ball milling tanks on a large plate. When the plate rotates (revolution), it drives the ball milling tanks to rotate around their own axis (rotation), thus forming planetary motion. The transmission ratio between revolution and rotation is 1:2 (revolution for one revolution, rotation for two revolutions). The grinding balls and abrasives inside the tank collide, crush, grind, and mix the test samples under the action of two centrifugal forces: revolution and rotation.

3. Characteristics

A. The A5-05M gear transmission planetary gear system is made of self-lubricating reinforced engineering plastics in our factory, which ensures mechanical strength and reduces noise.

B、 Interval operation function: In order to prevent overheating caused by ball milling from affecting the performance and quality of materials, this machine can automatically control the time of each state in a cycle mode of "run stop re run".

4. Technical parameters

Model number	A5-05M
Can be equipped with ball milling jar: volume (single jar volume, unit: milliliter)	50, 100, 250, 400, 500
material	Stainless steel, agate, nylon, polyurethane, polytetrafluoroethylene, hard alloy (YG8), ceramics, etc. (agate can be paired with 400ml)
type	Ordinary cans, stainless steel vacuum cans, stainless steel vacuum sleeves (used in conjunction with agate, nylon, ceramic and other ball milling cans for vacuuming). The volume of vacuum ball milling tanks shall not exceed 250 milliliters
Loading capacity of ball mill jar	Three quarters of the tank capacity (including grinding balls)
Feed particle size	Brittle material ≤ 10mm, other materials ≤ 3mm
Discharge particle size	Up to 0.1 μ m
Rated speed	Revolution (disk) 290 revolutions per minute ± 10%, rotation (ball mill): 580 revolutions per minute ± 10%
Operation mode (the ball mill is controlled by a frequency converter and has five operation modes)	1. Unidirectional operation, intermittent shutdown; 2. Unidirectional operation, timed shutdown; 3. Alternating forward and reverse operation, timed shutdown; 4. Unidirectional interval operation, timed shutdown; 5. Alternating between forward and reverse operation, with timed shutdown.
Speed regulation method	Variable frequency speed regulation 0-50Hz, resolution 1Hz, local speed limit 0-45Hz
Control method	0-45Hz (0-580 revolutions per minute) can be manually adjusted at any time, with timed operation of 0.1-100 hours, timed forward and reverse rotation of 0.1-50 hours, timed interval operation of 0.1-100 hours, and 0-100 restarts
Motor model	Y802-4 three-phase AC 0.75KW 1400 rpm
External dimensions of this machine	750×460×590 ㎜
Net weight of this machine	130KG
Open the lid and turn off the power	Equipped with a travel switch, it has the function of opening the cover, cutting off power, and stopping rotation
Continuous working time (full load)	72 hours
Models that can be paired with regular ball milling jars (can be paired with 4 such jars)	100ML 250ML 500ML
Models that can be equipped with stainless steel vacuum ball milling tanks (can be equipped with 4 such tanks)	100ML 250ML
Models that can be equipped with stainless steel vacuum ball milling sleeves (can be equipped with 4 such cans)	100ML 250ML