ATS600 Ultrasonic Hardness Tester

NegotiableUpdate on 10/24

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The ATS600 ultrasonic hardness tester is a new type of portable hardness testing instrument that uses ultrasonic contact impedance method to compare and measure samples. It has the advantages of high accuracy, fast speed, easy portability, simple operation, and non-destructive measurement. The ATS600 ultrasonic hardness tester measures hardness by applying a fixed pressure to a calibrated vibrating rod equipped with a specific indenter (such as Vickers diamond). Ultrasonic hardness testers are usually calibrated at the factory to be suitable for non alloy steel and low-alloy steel. For materials with different Young's moduli, on-site calibration of the instrument is required.

Product Details

Overview of ATS600 Ultrasonic Hardness Tester

ATS600 ultrasonic hardness tester is a new type ofPortable hardness testing instrumentThe ultrasonic contact impedance method is used for comparative measurement of samples, which has the advantages of high accuracy, fast speed, easy portability, simple operation, and non-destructive measurement.

Ultrasonic hardness tester measures hardness by applying a fixed pressure to a calibrated vibrating rod equipped with a specific indenter (such as Vickers diamond). Ultrasonic hardness testers are usually calibrated at the factory to be suitable for non alloy steel and low-alloy steel. For materials with different Young's moduli, on-site calibration of the instrument is required.

Compliant with standard: ASTM-A1038-05; DIN 50159-1； JB/T 9377-2010。

Features of ATS600 Ultrasonic Hardness Tester

High measurement accuracy - up to ± 3% HV, ± 3% HB, ± 1.5HR. (This measurement accuracy was measured using a test stand)

Small test indentation - requires high-power microscope to observe

Fast measurement speed - can output test results within 2 seconds

Large screen display - directly displays the current measurement value, cumulative measurement value, * large value, * small value, average value, and unit conversion value

Massive storage - can store 2000 sets of measurement data in the instrument's internal memory

Easy calibration - can store 20 sets of calibration data in the instrument memory, 1 set of default data, and users can set 19 sets.

Application range of ATS600 ultrasonic hardness tester

Hardness measurement of flange edge and gear root stamping parts, tooling, thin plates, surface hardened teeth and gear grooves, and taper parts

Hardness measurement of shafts, thin-walled pipelines, and containers

Hardness measurement of wheels and turbine rotors

Hardness measurement of the cutting edge of the drill bit

Hardness measurement of welding parts

Measure deep holes with a certain aperture depth, dents and protrusions with large curvature, irregular planes

Can cover the hardness measurement of the vast majority of black metals, non-ferrous metals, and their alloys in industrial production

Technical parameters of ATS600 ultrasonic hardness tester

Hardness value standard: Vickers (HV), Rockwell C (HRC), Brinell (HB), etc

Test range: HV 50-1599, HRC 20.3-76, HB 76-618, HRB 41-100, HRA 61-85.6

Test direction: Supports 360 °, as long as the pressure head forms a 90 ° ± 5 ° angle with the measured surface, the measurement operation can be carried out

Battery specification: 4.2V, 4800mAh lithium battery

Battery life: 10 hours

Can be connected to an external portable printer to print measurement data or to a computer super terminal to export measurement data

Can store 2000 sets of measurement data and 20 sets of calibration data

Multiple points can be measured to accumulate and average the uneven distribution of hardness values on the tested workpiece

The optional testing bracket has fast batch testing speed, easy operation, and high testing accuracy for small finished workpieces

No damage to the surface of the tested workpiece, good stability, and high testing accuracy

Ultrasonic hardness tester host specifications: 160 × 82 × 30mm

Measuring head specification: Φ 20 × 150mm

Total weight of ultrasonic host and probe: 760g

Basic configuration of ATS600 hardness tester

ATS600 Ultrasonic Hardness Tester Host

Standard probe

hardness block

charger

Instruction Manual

Certificate of Compliance

Password packaging box

HP-K probe selection and parameters

Probe type

1kg manual probe HP-1K (optional)

2Kg manual probe HP-2K (standard)

5Kg manual probe HP-5K (optional)

10Kg manual probe HP-10K (optional)

Real testing power

10N

20N

50N

98N

diameter

22mm

22mm

22mm

22mm

length

154mm

154mm

154mm

154mm

Resonant rod diameter

2.4mm

2.4mm

3mm

3mm

Measurement surface * large roughness

Ra<3.2um

Ra<5um

Ra<10um

Ra<15um

Workpiece * small weight

0.3kg

0.3kg

0.3kg

0.3kg

Workpiece * small thickness

2mm

2mm

2mm

2mm

Application scenarios of measuring heads

Ion nitriding die, mold shell, fixture, thin-walled part, bearing, tooth side and pipeline inner wall

Ion nitriding die, mold shell, fixture, thin-walled part, bearing, tooth side and pipeline inner wall

Measure grooves, tooth sides, and tooth roots

Small forgings, casting materials, weld inspection, heat affected zone, with low requirements for roughness

The basis for selecting the probe is shown in the table below (the actual indentation depth is about 10% of the data in the table below)

Ultrasonic hardness tester measures the small thickness (unit: μ m) (10 times the indentation depth) corresponding to specific hardness values using different probes
	HP-1K	HP-3K	HP-5K	HP-10K
800HV	69	100	150	220
500HV	79	110	180	250
300HV	112	160	250	350

Probe type	1kg manual probe HP-1K (optional)	2Kg manual probe HP-2K (standard)	5Kg manual probe HP-5K (optional)	10Kg manual probe HP-10K (optional)
Real testing power	10N	20N	50N	98N
diameter	22mm	22mm	22mm	22mm
length	154mm	154mm	154mm	154mm
Resonant rod diameter	2.4mm	2.4mm	3mm	3mm
Measurement surface * large roughness	Ra<3.2um	Ra<5um	Ra<10um	Ra<15um
Workpiece * small weight	0.3kg	0.3kg	0.3kg	0.3kg
Workpiece * small thickness	2mm	2mm	2mm	2mm
Application scenarios of measuring heads	Ion nitriding die, mold shell, fixture, thin-walled part, bearing, tooth side and pipeline inner wall	Ion nitriding die, mold shell, fixture, thin-walled part, bearing, tooth side and pipeline inner wall	Measure grooves, tooth sides, and tooth roots	Small forgings, casting materials, weld inspection, heat affected zone, with low requirements for roughness