Acid purification

NegotiableUpdate on 12/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Acid purifier: also known as acid distiller, high-purity acid extraction system, acid purification system, sub boiling distiller, high-purity acid distillation purifier. In routine laboratory analysis, various acids and reagents are widely used in daily sample processing and analysis. However, what troubles many consumers is the purity of the acid and reagents. Many laboratories often experience deviations and errors in analysis results due to the poor purity of the acid. Commercially available ultra pure acids are often difficult to meet the high demand for acid in daily analysis due to their high price. Therefore, purifying and optimizing the quality of acid is the most economically feasible approach.

Product Details

Acid purifierIt uses the principle of thermal radiation to maintain the liquid temperature below the boiling point temperature for evaporation, and then condenses its acid vapor to prepare high-purity water and high-purity reagents, which are widely used in sample processing and analysis. The CH high-purity acid distillation system uses Teflon corrosion-resistant and non absorbent plastic containers, which can handle commonly used laboratory acids such as HNO3, HCL, HF, etc. Experimental results have shown that after one distillation of an acid with a metal impurity content of about 10 PPB, the metal impurity content can be reduced to around 0.01 PPB. If higher acid requirements are needed, the purification frequency can be increased.

Technical parameters of acid purifier

1. Automatic power control and easy to edit temperature control program;

2. Preparation of ultrapure acids (HNO3, HCI, HF) for trace analysis;

3. Using high-purity TeflonFEP, PTFE, PFA materials;

4. It can eliminate waste liquid and visualize the liquid level; All made of Teflon material;

5. Temperature control accuracy: ± 1 ℃, temperature control range: room temperature -200 ℃;

6. The acid purification process is carried out in a closed environment to avoid secondary pollution of the experimental environment of the instrument itself, and there is almost no acid gas escaping from the entire process;

7. Sustainable acid addition, using pure acid;

8. Not afraid of steaming dry, with overheating protection function, all exposed parts of the instrument are coated with Teflon anti-corrosion coating;

9. No need for cooling water;

10. Power: 350W;

11. Voltage: 220V/50Hz.