Korean LabTech muffle furnace

NegotiableUpdate on 12/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The electrical part of the South Korean LabTech muffle furnace adopts an integrated structure with the furnace body, and the entire electrical components are installed on one side of the bottom of the furnace body, with a compact structure and small space occupation

Product Details

　　Korean LabTech muffle furnaceThe electrical part adopts an integrated structure with the furnace body, and the entire electrical component is installed on one side of the bottom of the furnace body, with a compact structure and small space occupation. The temperature control is installed on the side panel of the furnace body, which is intuitive to observe and easy to adjust. The temperature controller has PID adjustment function, which can automatically track and set the PID value, and can set the measurement division password arbitrarily. At the same time, it has compensation function, which can make the furnace temperature and display value *. The temperature control method adopts Siemens technology from Germany, with soft start, soft stop, thyristor phase-shift voltage regulation control, and adjustable output of 0-98%. Various instrument switches on the panel have corresponding Chinese labelsKorean LabTech muffle furnacePrecautions for use:

When reusing after repeated use or long-term disuse, the oven should be dried at a temperature of 200-600 ℃ for about 4 hours.

2. During use, the furnace temperature should not exceed the maximum blast furnace temperature, and should not be operated above the rated temperature for a long time.

3. The working environment conditions are: temperature 0-50 ℃, relative humidity<80%, no conductive dust, no flammable and corrosive gases.

To ensure safe use, a grounding wire must be installed and well grounded.

5. When using, the furnace door should be gently closed and opened to prevent damage to the components.

When placing samples in the furnace, the power should be turned off first and handled gently to ensure safety and avoid damaging the furnace.

7. To extend the service life of the product and ensure safety, samples should be taken out of the furnace in a timely manner after the equipment is used, the heating should be stopped, and the power should be turned off.