Advantages of float level gauge

NegotiableUpdate on 01/01

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The panel indication form of SR-UQZ float level gauge is similar to that of a watch The long pointer scale is cm, and both the pointer and scale are black. The short pointer scale is m, and both the pointer and scale are red. During full measurement, the indicator numbers are arranged in a clockwise direction, while during empty measurement, the indicator numbers are arranged in a counterclockwise direction.

Product Details

Technical Specifications

● Accuracy: Level 2.5 ● Environmental temperature: -40~55 ℃ ● Medium temperature: ≤ 120 ℃ ● Material: 1Gr18ni9ti

Installation and usage precautions

■Advantages of float level gaugeIt should be installed in a position where the float moves up and down unobstructed.

The tested medium should not contain ferromagnetic impurities.

To prevent transportationSR-UQZThe floating ball of the instrument slides or collides at high speed on the sealed tube, causing the measuring strip to come out, so the instrumentBefore leaving the factory, the float ball is fixed at the bottom of the sealing tube with clamps, and the magnetic steel is at the top of the sealing tube. Users should remove it before installation and useClamp the float up to the top of the sealing tube, then gently move the float down, and the pointer should rotate accordingly.

■Advantages of float level gaugeThe panel indication form is similar to that of a watch The long pointer scale is cm, and both the pointer and scale are black,The short pointer scale is m, and both the pointer and scale are red. During full measurement, the indicator numbers are arranged in a clockwise direction, while during empty measurement, they refer toThe numbers are arranged counterclockwise.

■ Installation flange A is attached at the factory. Users should provide their own pipeline flange B, or they can directly use it with corresponding sealing

The flange on the surface replaces the connecting pipe in the diagram.

■SR-UQZFloat level gaugeThe installation position is generally selected at half of the range,

Ordering Instructions

● Product model and name ● Installation form ● Density of the measured medium ● Material ● Measurement method ● Working pressure

Model

UQZ	Float level gauge
	1. Used for containers such as underground water tanks or oil depots 2. Use of mobile devices such as tank trucks	Scope of Application
	1DN100, DN125, PN1.6MPa flange standard GB9119-88 2 thread installation	Installation method
	1≥0.7g/cm3 2≥0.56g/cm3 3≥0.45g/cm3	medium density
	1m、1.5m、2m、2.5m	range
UQZ-1		Typical Model Example

SR-UQZMulti float level gauge

浮球直径：	Ø51mm
Number of floating balls:	2 or more
Guide rod diameter:	Ø12mm
Connection method:	Flange or pipe thread
Electrical interface of junction box:	M20*1.5mm
Applicable voltage:	≤250VA(D)C
Applicable current:	≤500mA
Contact capacity:	AC70(VA) DC50(W)
Output signal: (Proposed by the user)	Float up: ON Float downwards: OFF [broken]
Location of each control point: Installation position downwards [mm]	Proposed by the user

SR-UQZFloating ball transmission sensor

浮球直径：	Ø76mm
Number of floating balls:	1 piece
Guide rod diameter:	Ø 14mm or Ø 18mm
Connection method:	Flanges or other methods
Electrical interface of junction box:	M20*1.5mm
Applicable voltage:	24VDC power supply
Applicable current:	------------------
Contact capacity:	------------------
Output signal: (Proposed by the user)	4~20mADC Resolution of about 20mm
Location of each control point: Installation position downwards [mm]	The measurement length is proposed by the user

SR-UQZInput cable type multi float switch

浮球直径：	Ø28mm
Number of floating balls:	2 or more
Guide rod diameter:	---------------
Connection method:	Flanges or other methods
Electrical interface of junction box:	M20*1.5mm
Applicable voltage:	≤250VA(D)C
Applicable current:	≤500mA
Contact capacity:	AC70(VA) DC50(W)
Output signal: (Proposed by the user)	Float up: ON Float downwards: OFF [broken]
Location of each control point: Installation position downwards [mm]	Proposed by the user