Air cooled xenon lamp tube

Air cooled Xenon Lamp Tube 3KW Air cooled Xenon Lamp Weathering Test Chamber Special Test Tube, length 550-590mm, diameter about 20-25mm. This air-cooled Xenon Lamp tube needs to be lit by two 1500W DC power supplies, a trigger, and a combination of Xenon Lamp Tube. Customers should carefully check whether the Xenon Lamp Weathering Test Chamber is equipped with the same configuration before purchasing to avoid being unusable and causing greater economic losses.

Please make sure to check the positive and negative poles of the lamp clearly during installation, and confirm that the equipment is being operated with the main power turned off. The trigger input terminal should not be touched regardless of whether the device is powered on or off to avoid high-voltage injuries.

There is a metal arc around the glass tube of this air-cooled xenon lamp tube. Before installation, it is necessary to check whether it has fallen off or drooped, otherwise the lamp tube cannot arc and may not light up. The nuts at both ends should not be tightened too tightly. Generally, it should be felt by hand that they have been tightened and will not fall off. There is no need to use other hard tools such as wrenches. To prevent the xenon lamp tube from twisting and breaking.

This xenon lamp tube is guaranteed to be intact without any damage or cracks before shipment. If there are cracks (no damage) during transportation after purchase, customers can send it back to our company for exchange, but it must be checked clearly during the delivery inspection. Otherwise, once signed for, it will not be returned or exchanged.

For other specific details, please call Manager Liu for consultation.