Automatic linear filling machine

1、 Scope of application of automatic linear filling machine:
The automatic linear liquid filling machine is easy to operate and convenient to use. It is used for automatic filling of liquids with different viscosity in food, chemical industry, daily chemical industry, Baijiu, edible oil and other industries.
Automatic linear filling machine is mainly used for liquid filling, such as lotion, nursing liquid, oral liquid, skin care liquid, base liquid, antifreeze, shampoo, hair care liquid, hand washing liquid, lotion, nutrient liquid, detergent, body wash, perfume, milk, fruit juice, etc. Beverage, lubricant and other industries.
2、 Characteristics of automatic linear filling machine:
a. Improved design is based on borrowing from similar products and adding some additional features.
b. The product is relatively simple and convenient in terms of operation, accuracy error, installation adjustment, equipment cleaning, maintenance, etc.
c. The automatic linear filling machine is designed to be compact and reasonable, with a simple and beautiful appearance, and easy filling adjustment.
d. This machine has six filling heads, driven by six cylinders, and the filling speed is relatively fast.
e. The material contact material is 316L stainless steel.
f. Easy to adjust, accurate filling volume, counting function.
g. Adopting anti drip wire drawing filling plug, anti bubble filling lifting system, positioning system, bottle mouth position and liquid level control system.
3、 Precautions for automatic linear filling machine:
1. When adding, the total metering pump should run for about 3 minutes to discharge the bubbles in the pipe and ensure accurate addition.
2. If the bubbles inside the tube cannot be cleaned for a long time, the filling amount will be inaccurate. The main reason is that an air leak in the pump fluid channel can be detected by checking the upper and lower check valves of the piston sealing ring in the total metering pump, silicone head, and other joints in the cylinder block. If there is too much residue in the liquid, the check card will not be able to close the one-way valve in the valve plate, which can also lead to inaccurate filling.
3. The automatic linear filling machine has the function of protecting against missing and stuck bottles. When there are only two working packaging boxes left on the bottle handling track, the automatic stop micro switch will be disconnected and the filling will automatically stop. At this point, if the fault light needs to be refilled, the manual and automatic switches can be moved to the manual side and the machine can run.
4、 Maintenance of Automatic Linear Filling Machine
Before operating the automatic linear filling machine, we should have a clear understanding of the manual for the automatic linear filling machine. Carefully read the instruction manual and familiarize yourself with the adjustment and use of the filling machine. When operating, strictly follow the operating procedures of the filling machine and pay attention to details.
2. According to the maintenance instructions for the automatic linear filling machine, regular maintenance is carried out by oiling the body of the filling machine to provide as much oil layer protection as possible, thereby isolating the air and preventing rusting of the filling machine. The body of the filling machine is also well inspected, which is a method to extend its service life.
3. We also need to pay attention to the cleanliness of the sealing cloth of the hot press frame, avoid leaving foreign objects on it, keep the filling machine clean, and prevent corrosion caused by long-term accumulation of dirt in the air inlet.
4. We need to regularly inspect the automatic linear filling machine to see if the contact between different parts of the machine is good. Easy to ensure electrical safety and prevent harm caused by improper use of electricity.
5. When a fault is found in the automatic linear filling machine, the power should be cut off in a timely manner, the emergency stop button should be pressed, the lid should be lifted after releasing air, and then the voltage should be turned off. The cause should be checked and the fault should be eliminated.
6. Some minor issues are inevitable when using an automatic linear filling machine. When there is a problem with the filling machine, it should not be dismantled blindly, but rather seek after-sales service.
5、 Reasonable utilization of automatic linear filling machine
1. Water is often discharged from the air-water separator of the automatic linear filling machine.
2. Regularly adding fuel mist, the fuel volume accounts for one-third of the cup.
3. The filter and water cup of the steam water separator of the automatic linear filling machine should be cleaned regularly. The filter element needs to be cleaned with mineral oil and then dried with compressed air.
4. The cylinder of the automatic linear filling machine is lubricated when it leaves the factory. Do not open the oil cylinder or add lubricant.
5. Foreign objects should not be mixed into the filling material, otherwise it may cause improper discharge or damage to machine components.