Automatic metallographic sample grinding and polishing machine YMPZ-2

The automatic metallographic sample grinding and polishing machine YMPZ-2 is a microcontroller controlled metallographic sample grinding and polishing machine. The grinding disc has a stepless speed regulation of 100RPM-1400RPM, and the digital tube displays the grinding disc speed. The motor is a DC brushless motor with a grinding head of 20RPM-120RPM Stepless speed regulation, digital display of grinding disc speed, with timing function, timing time 0-100 minutes, digital display, timing and grinding disc synchronization, motor is a DC brushless motor, motor does not need to replace brushes, long use time, machine vacuum baking paint, non-toxic, sturdy large support chassis design ensures precise rotation balance, strong motor torque brings powerful power, efficient grinding and polishing experience, spindle leak proof design ensures almost no damage to bearings, super quiet design brings good user experience, the whole series supports fast disc changing system, good elasticity, can be matched with automatic grinding device Main features: low noise, easy operation, beautiful appearance, safe use It is one of the laboratory sample preparation equipment
Body form; Table type. It mainly consists of vacuum formed shell, grinding disc, grinding head, rotating shaft, water system, pneumatic system, brushless motor and control system.

Main technical parameters:

Grinding method: automatic grinding
Grinding disc diameter: Φ 230mm
Grinding speed: 100-1400rpm
Speed regulation method: stepless speed regulation
Grinding horsepower: 400W
Machine body: vacuum formed shell, corrosion-resistant and rust resistant head
Grinding number of test pieces: 4
Air pressure: 2.3~8kg/cm ²
Grinding head speed: 20-120 rpm stepless speed regulation
Pressure method for mold head: gas is separately pressurized
Sample size: MAX Φ 45mm (optional, with special specifications of diameter 25, 30, and 45)
Operation interface: film switch, digital display, can set grinding speed, timing, steering, and sink cleaning functions
Display: 1. Operating speed 2. Time countdown 3. Air pressure
Pressure adjustment range: 0-6 Kg
Grinding time: adjustable range 0-100 minutes (remaining grinding time can be displayed during grinding)
Grinding head rotation angle: grinding direction can be adjusted
Grinding direction: can choose forward and reverse rotation
Test piece clamp: The test piece fixture can be quickly replaced (quick disassembly function)
Machine size: 757L * 623W * 6450mm
Power supply: AC220V
Equipment power: 1000W
Weight: 78kg