Balance car electric scooter whole vehicle extrusion durability strength testing machine

Balance car electric scooterWhole vehicle extrusion durability strength testing machine

1Scope of application: This machine is used for balancing vehiclesscooterVehicle durability fatigue test, system uses cylinders+Perform fatigue testing on force sensors to provide data support for manufacturers to monitor product quality and lifespan

2According to standards and principles: GB/T 34667-2017 5.5.3/6.4.3 ； GB/T 34668-2017 7.2/9.3.2 7.3/9.3.3.2 (force application part); CQC 1125-2018 16.3 (Force Application Section)

3Main technical parameters:

1)Sensor capacity:Two 5000N units

2)Load element resolution: 1/10,000

3)Experimental force: 0N-4000N can be set, the system automatically provides force protection

4)Number of force application mechanisms:Two force application mechanisms can apply force simultaneously

5)Pressure head specifications:102mm×254mm

6)Test frequency: 0-3Hz (adjustable)

7)Test frequency: 0-999999 times can be set

8)Loading method: Pneumatic loading

9)Shutdown mode: Automatic shutdown due to specimen damage or exceeding displacement

10)Equipped with a stable pressure air tank, it can better stabilize the working pressure and make the loading force smoother

11)Pneumatic component brand: Yadeke

12)Power Supply: AC 220V 50HZ 800W

13)Gas source: Air pressure 0.7MPa gas flow 300L/MIN

14)The main body of the machine is made of steel components, which have high strength and are not easily deformed.

15)The machine base is made of solid steel with good stability, equipped with reinforcing ribs and adjustable horizontal feet.

16)The appearance of the machine is electrostatically sprayed and other components are electroplated, with high rust prevention ability and beautiful appearance.

17)Equipment footprint:2000*2000mm