Box type rain test chamber, swing pipe rain test chamber, rain test equipment

NegotiableUpdate on 02/02

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Box type rain test chamber, swing pipe rain test chamber, rain test equipment

Product Details

1、 Introduction: The IPX5/6 (pendulum tube) box rain test chamber produced by the manufacturer of Shenzhen Ritel test chamber has the ability to simulate heavy rain and rainstorm in the rain environment, which is mainly applicable to the test of the shell's ability to prevent rain water penetration or its working performance when or after being exposed to rain when the electronics and electricians, automobile parts shells and seals are exposed to rain.

2、 According to the standard

The "Degrees of Protection Provided by Enclosures (IP Code)" is equivalent to "IEC 60529:2001" GB 4208-2008
Environmental Durability of Road Vehicles and External Lighting and Light Signal Devices GB10485-2007
GB10485-2007 Basic Test Procedures for Manufacturing External Lighting of Automobiles and Trailers
Environmental Test Methods for Military Equipment - Rain Test (GJB 150.8-86)
※ Customization can be made according to customer requirements and different standards.

3、 Main technical parameters

Model specifications			RTE-LX-500	RTE-LX-800	RTE-LX-010	RTE-LX-015	RTE-LX-020
Internal dimensions		D(mm)	800	800	1000	1000	1200
		W(mm)	800	1000	1000	1500	1400
		H(mm)	800	1000	1000	1000	1200
volume			500L	800L	1000L	1500L	2000L
temperature range			normal temperature
water pressure			Adjust water flow according to regulations
internet traffic			12.5 ± 0.626L/min (IPX5), 100 ± 5L/min (IPX6)
Spray pipe diameter			ф6.3mm（IPX5）、ф12.5mm（IPX6）
Nozzle distance			The distance between the nozzle and the surface of the specimen shell should be 2.5-3m
Spray time			The water spraying time per square meter on the surface of the test piece shell is about 1 minute, and the test time is at least 3 minutes (controlled by the test personnel)
material	casing		Stainless steel plate SUS304
	endosome		Stainless steel plate SUS304
regulator	heater		Nickel chromium alloy electric wire heater
	fan		centrifugal fan
controller	monitor		Intelligent digital display controller, adopting PID self-tuning function, LED intuitive display, touch input method
	Operation mode		Fixed value method
power supply			1/N/PE AC220V±10% 50Hz			3/N/PE AC380V±10% 50Hz
Standard configuration			1 observation window, 1 set of sample rack, 1 lighting fixture, standard power cord (3 meters long), 4 casters
timer			Automatically stop when the device reaches the set running time, with a high degree of automation.
Safety device			Power overload, short circuit protection, phase loss protection, grounding protection, over temperature protection, water shortage protection, alarm sound prompt
Conditions of Use			1. Environmental conditions: Relative temperature: 15-35 ℃ Relative humidity: not exceeding 85% RH Atmospheric pressure: 86-106Kpa There is no strong vibration around No direct sunlight or direct radiation from other heat sources There is no strong airflow around, and when the surrounding air needs to be forced to flow, the airflow should not be directly blown onto the box There is no strong electromagnetic field influence around There is no high concentration of dust or corrosive substances around 2. Power supply: 1/N/PE AC220V ± 10% 50Hz or 3/N/PE AC380V ± 10% 50Hz; 3. Space conditions: For the convenience of ventilation, operation, and maintenance, a distance of at least 600mm should be left around the equipment from other objects.

The above main technical indicators were measured at an ambient temperature of+25 ℃ without sample conditions.