Vertical drip testing device, waterproof testing machine, rain testing machine

The IPX1, 2 vertical drip test devices produced by the manufacturer of Shenzhen Ruitaier test box have the ability to simulate heavy rain and rainstorm in the rain environment, and are mainly applicable to the test of the shell's ability to prevent rain infiltration or the working performance of the shell when or after being exposed to rain in the case of electronics, electricians, automobile parts and seals in the rain.

The IPX1/2 vertical drip test device is widely used for waterproof testing purposes in the shell protection level (IPX1, IPX2) of electrical, electronic, and lighting products by certification testing agencies and related quality control departments. The test to be conducted when the second characteristic digit of the shell protection level is 1 or 2, meeting the requirements IEC60529、IEC60598、IEC60335、IEC 60034-5:2000、GB2423、GB7000.1、GB4208<< Design and manufacture according to standard requirements such as protection level>>, protection level (IP code) classification for the overall structure of rotating electrical machines in GB/T 4942.1, and protection level for low-voltage electrical enclosures in GB/T 4942.2.

1. Drip head size: 1000mm * 1000mm * 75mm (H)

2. Drip head material: 304 # stainless steel

3. Drip aperture: ￠ 0.4mm, safe and easy to disassemble, install and replace (needle type)

4. Hole spacing: 20mm

5. Rainfall:~mm/min (manually adjustable)

6. Drip head lifting height: 200mm~2000mm (electrically adjustable)

7. Sample stage: adjustable tilt angle of 0 degrees/15 degrees (convenient for testing), rotation rate of 1r/min

8. Sample table load-bearing capacity: ≥ 100KG;

9. Test time: 10 minutes or adjustable (reflected in the centralized control system);

10. Body material: all 304 # stainless steel;

11. One set of rainfall measuring cylinder for calibration and self calibration;

12. Dimensions (L * D * H): Approximately 1200X1400X2400mm