CR1000X Measurement and Control Data Collector

CR1000X is our flagship product that can meet a wide range of needs in measurement and control. The reliability and robustness of CR1000X ensure that it can be applied in fields such as meteorological stations, mesoscale meteorological networks, wind profiles, air quality monitoring, hydrological systems, water quality monitoring, and hydro meteorological stations.

The CR1000X also has the advantage of low power consumption, reflected in sensor measurement, direct/remote communication connection, data analysis, external device control, data and program storage, and other aspects. The CR1000X adopts a sealed device to shield RF interference, and has functions such as precision clock, BASIC programming language, data processing and analysis.

Working in extreme environments, standard operating temperature range -40 ° C~+70 ° C, extended operating temperature range -55 ° C~+85 ° C

Computer USB port direct connection

Equipped with fast simulation measurement function (300+Hz)

24 bit A/D conversion, high-precision analog measurement

Two non isolated current input channels, capable of receiving 0~20 mA or 4~20 mA signals

CPI port can connect high-speed sensors and distributed modules (CDM)

Integrated Ethernet interface

Support microSD memory card and expand memory

Supports SDI-12, RS-232, RS-485

Supports the complete PakBus protocol

Includes firmware for web pages, which can be directly connected through a web browser

CR1000X is a low-power device used for sensor measurement, direct/remote communication connection, data analysis, external device control, data and program storage. It adopts a sealed device to shield RF interference and has a metal stainless steel shell. Precision clock, supporting the universal BASIC programming language for Campbell Scientific data collectors - with data processing and analysis functions. There are two switch 12V terminals and 16 analog measurement terminals on the CR1000X wiring panel, and the terminals are detachable.

The CR1000X is compatible with the vast majority of sensors, including analog (voltage and current), thermocouple, serial port, SDI-12, pulse and frequency sensors.

CR1000X is compatible with our CDM modules, multiplexers, oscillator interface boards, terminal input modules, and relays.

The PC connection methods supported by CR1000X include: USB, 10/100baseT Ethernet port, multipoint modem, short-range modem, telephone modem (wired, digital cellular, voice synthesis), RF radio, satellite transmission (HDR GOES, Argos, Meteosat, Iridium, and Inmarsat)

The CR1000X and power supply can be installed in any standard chassis.

The CR1000X requires a 12 Vdc DC power supply. For example, BPALK, PS150, and PS200.

The CR1000X data collector is programmed, configured, and communicated using Campbell Scientific software. There are several software options available, among which Short Cut and PC200W are the minimum configurations. Please contact Campbell Scientific technical support personnel for specific details.

LoggerLink (version 1.6 or higher)

Device Configuration Utility (version 2.16 or higher)

Short Cut (version 4.0 or higher)

PC200W (version 4.5 or higher)

PC400 (version 4.5 or higher)

LoggerNet (version 4.5 or higher)

LNLINUX (version 4.5 or higher)

RTDAQ (version 1.3 or higher)