Closed dual point press T2N series

NegotiableUpdate on 08/23

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

·The high rigidity fuselage is divided into crossbeams, columns, and bases, with a closed structure that is separated and tightened with four tightening screws. The fuselage has good rigidity and minimal deformation

Product Details

闭式双点压力机T2N系列

·Adopting an eccentric shaft, arranged in the left and right directions, with a large center distance between the two connecting rods, it has strong resistance to eccentric loads and is suitable for continuous molds.

·Adopting a combined pneumatic dry friction clutch brake system, it has low noise, high clutch torque, small braking angle, and long service life.

·The slider adopts an eight sided guiding full structure, with a long guide rail to ensure motion accuracy.

·Adopting hydraulic overload protection device, brake assist, reliable use and easy maintenance.

·Adopting a thin oil forced lubrication system with oil circuit fault alarm function.

·Optional air cushion and mobile workbench.

type		T2N-200		T2N-300		T2N-400
tonnage	ton	200		300		400
Ability occurrence point	mm	5	7	7	9	7	9
Long stroke	mm	150	300	250	350	300	400
Long travel time per minute	s.p.m	30-70	20-30	30-50	20-30	20-40	20-30
Closed working height	mm	450	500	550	650	600	700
Punch Weight	kgs	2000		2500		4000
Slide Adjustment	mm	125		150		150
Slide board size	mm	1650x1100	1850x1100	2000x1200	2350x1300	2500x1300	3400x1400
Table size	mm	1800x1200	2000x1200	2150x1300	2500x1400	2700x1300	3400x1400
Plate thickness	mm	150		180		200
side opening	mm	550x450	550x500	650x600	650x700	650x600	800x700
Work-Surface Height	mm	950		950		950
Motor	kwxp	22x4		37x4		45x4
Slide adjustment motor	HPxP	1.5x4		2.2x4		3.7x4
Platform structure		integrated		Integrated/Triple Split		Integrated/Triple Split

T2N-500		T2N-630		T2N-800		T2N-1000
500		630		800		1000
8	12	8	12	9	13	9	13
300	400	300	400	300	400	300	400
15-35	15-25	20-35	15-25	20-30	16-24	20-30	16-24
600	840	700	900	800	900	1000	1100
4800		5500		8000		12000
200		250		250		250
3000x1300	3600x1400	3600x1400	4000x1500	4000x1500	4500x1600	4500x1600	5000x1800
3000x1300	3600x1400	3600x1400	4000x1500	4000x1500	4500x1600	4500x1600	5000x1800
220		250		250		300
700x700	800x800	800x700	1000x800	1000x900	1100x1000	1100x1000	1200x1000
950		1000		1000		1000
55x4		75x4		90x4		110x4
3.7x6		7.5x4		11x4		11x4
Three segmentation		Three segmentation		Three segmentation		Three segmentation

Standard accessories	Selective Accessories
Oil pressure overload protection device	Mold pad
Electric slider adjustment device	Top material device for slider upper part
Digital height indicator (unit: 0.1MM)	Mold lighting fixture
Sliding block and mold balancing device	Main motor reversing device
Rotating cam switch	3-digit cutting counter
Crankshaft angle indicator	Optoelectronic safety device
Circulating centralized lubrication oil supply device	Safety block and safety pin
Electromagnetic travel counter	Pre adjustment counter (6-digit)
Secondary fall protection device	Load detection device
Programmable controller	Misdelivery of detection device
Air blowing joint	frequency converter
Air source connector	Basic screws, foundation plates, and shock-absorbing devices
Mobile T-shaped operating platform	Safety frame and safety ladder
Independent electrical control box	Power plug
Maintenance tools and toolboxes	QUICK DIE CHANGE SYSTEM