Closed type double point eccentric large gear press S2N series

NegotiableUpdate on 09/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

·The body is a closed structure consisting of crossbeams, columns, and a base, with four tension screws for good rigidity

Product Details

闭式双点偏心大齿轮压力机S2N系列

·The body is a closed structure consisting of crossbeams, columns, and a base, with four tension screws for good rigidity.

·Eccentric gear structure, large slider stroke, large center distance between two connecting rods, strong anti eccentric load capacity.

·Sliding block with eight sided guide, long guide to ensure operational accuracy.

·Dry pneumatic friction clutch has low noise, high clutch torque, small braking angle, and easy maintenance.

·Hydraulic overload protection device, overload automatic emergency stop, protects the safety of the press and mold, and is easy to use.

·The thin oil automatic lubrication system has an oil circuit alarm function to ensure the smooth operation of the machine tool.

·PLC electrical centralized control, with specifications for emergency stop, inching, single operation, and continuous operation.

·Optional photoelectric protection, transmission output shaft, automatic feeding, air cushion, mobile workbench, temperature sensor device, etc.

type		S2N-250		S2N-400		S2N-500
ability	ton	250		400		500
Ability occurrence point	mm	6	13	6	13	6	13
Long stroke	mm	250	400	250	500	250	500
Number of trips per minute	s.p.m	20-40	October 20th	20-40	October 20th	20-40	October 20th
die height	mm	600	800	600	900	600	900
Slide Adjustment	mm	200	400	200	400	200	400
Slide board size	mm	2500x1300	3000x1300	2800x1500	3400x1500	2900x1500	3500x1500
Bolster area	mm	3000x1300	3000x1300	2800x1500	3400x1500	2900x1500	3500x1500
Work-Surface Height	mm	650		650		700
Motor	kwxp	37x4		45x4		55x4

S2N-630		S2N-800		S2N-1000
630		800		1000
13		13		13
500		600		600
December 18th		October 16		October 16
1000		1100		1100
400		400		400
3200x1600	4000x1600	3200x1600	4500x1600	3600x1800	4500x1800
3200x1600	4000x1600	3200x1600	4500x1600	3600x1800	4500x1800
700		750		750
75x4		90x4		110x4

Standard accessories	Selective Accessories
Oil pressure overload protection device	die cushion
Electric slider adjustment device	Top material device for slider upper part
Digital height indicator (unit: 0.1MM)	Mold lighting fixture
Sliding block and mold balancing device	Main motor reversing device
Rotating cam switch	3-digit cutting counter
Crankshaft angle indicator	Optoelectronic safety device
Circulating centralized lubrication oil supply device	Safety block and safety pin
Electromagnetic travel counter	Pre adjustment counter (6-digit)
Secondary fall protection device	Load detection device
Programmable controller	Misdelivery of detection device
Air blowing joint	frequency converter
Air source connector	Basic screws, foundation plates, and shock-absorbing devices
Mobile T-shaped operating platform	Safety frame and safety ladder
Independent electrical control box	Power plug
Maintenance tools and toolboxes	QUICK DIE CHANGE SYSTEM