Computer based video camera microscope

Computer based video microscope
1、 Instrument usage:

Video microscopes can produce upright three-dimensional spatial images when observing objects. Strong stereoscopic effect, clear and wide imaging, and long working distance make it a widely applicable conventional microscope. It is easy to operate, intuitive, and has high calibration efficiency. It is suitable for the inspection of electronic industry production lines, printed circuit boards, welding defects (printing misalignment, edge collapse, etc.) in printed circuit components, single board PC calibration, vacuum fluorescent display VFD calibration, etc. It enlarges the image of the physical object and displays it on the computer screen. The image can be saved, enlarged, and printed. Equipped with measurement software, various data can be measured.

2、 Technical specifications

You can directly observe physical images on the television or computer.

1. Eyepiece: 10X field of view 18mm

2. Magnification range of objective lens: 0.7-4.5X
3. Magnification ratio: 6.5:1
4. Mobile working distance: 200mm
5. Table size: 390 × 160 (mm)
6. Total magnification: 7-450X (taking a 21 inch TV with a 2X large objective lens as an example)

3、 System Introduction：

The computer-based video microscope system is a high-tech product developed by perfectly combining precision optical microscope technology, advanced photoelectric conversion technology, and cutting-edge computer image processing technology. Real time dynamic images can be easily observed on the display screen, and the required images can be edited, saved, and printed.

4、 System composition：

Computer type (TVM-100C) 1. Straight tube stereomicroscope 2. Adaptor 3. Camera (CCD) 4. Image acquisition card 5. Computer

5、 Reference magnification factor：
Computer type (TVM-100C): 7-450 times (taking a 17 inch monitor and 2X times large objective lens as an example)