Customized ISO Cement Standard Thickener, Cement Vicat Tester, Cement Setting Time Tester, Rongjida Instrument

one、Product Introduction:

The cement standard consistency meter is manufactured and produced according to the provisions of GB/T1346-2001 "Method for Testing Water Consumption, Setting Time, and Safety of Cement Paste Standard Consistency". The cement standard consistency meter is suitable for the determination of Portland cement, ordinary cement, slag cement, volcanic ash cement, fly ash cement, and other types of cement. The cone test method of cement standard consistency meter is a representative method of standard consistency measurement method, and the test rod method is a standard method of standard consistency measurement method. Therefore, in daily experiments, the cone test method can still be used to measure standard consistency. The accessories of cement standard consistency meter are mainly used for standard consistency measurement method (standard method), determination of initial and final setting time. When determining the standard consistency and setting time of cement paste according to the new standard (standard method), only the sliding part of the original setting time measuring instrument needs to be replaced, while the fixed part (bracket and ruler) remains unchanged. All accessories of this cone clamp instrument are made of stainless steel, which is more durable compared to the materials plated with ordinary steel in the past.

two、Technical parameters:

★Sliding rod: 1 piece. φ12mm+0.02mm-0.10mm

★Standard viscosity test rod: 1 piece: Effective length: 50mm ± 1mm Diameter: φ 10mm ± 0.05mm

★Initial setting test needle: 2 needles. Effective length 50mm ± 1mm, diameter: φ 1.13mm ± 0.05mm

★Final setting test needle: 1 piece: effective length 30mm ± 1mm, diameter: φ 1.13mm ± 0.05mm

★Reading pointer: one

★Total weight of sliding part: 300g ± 1g

★Dimensions: 180 × 300 × 440mm

★Weight:3.5kg