Rongjida flexural testing machine DKZ-10 ceramic tile flexural testing machine

one、Product Introduction:

Suitable for the flexural strength test of gypsum board, the testing machine has an exquisite appearance and delicate craftsmanship. It adopts a servo control system and can achieve uniform loading efficiency, high stability, and good stability. Adopting touch screen control and user-friendly human-machine interface. The instrument is equipped with travel limit and positive and negative force overload protection functions inside. It has the characteristics of adjustable testing speed, high load measurement accuracy, and easy operation. Suitable for factories, construction quality inspection stations, construction companies, product quality inspection institutes, research institutions, road and bridge sites, production inspection, development research and other fields.

two、Technical parameters:
♦ Large test force: 2KN
♦ Load resolution: 0.1N
♦ Load measurement accuracy: within ± 1% of the displayed value
♦ Test speed: 4.2N/S/4.9N/S adjustable
♦ Test space range: 150mm
♦ Test piece range: 600 × 600mm
♦ Drive mode: servo motor drive
♦ Power supply: single-phase AC 220V/50Hz, motor power 550 W
♦ Dimensions: 700 × 800 × 1200mm
♦ Weight: 150KG

three、Product features:
♦ The measurement and control software for embedded Windows operating system environment displays real-time test data, curves, and automatic control of the test process. The test results are automatically obtained at the end of the test, and the software is simple and easy to use;
♦ Using computer control, it can achieve three loading modes: force velocity, displacement velocity, and programming, which can meet the requirements of the same standard test.
♦ Using a servo control system,Control the detection process.
♦ Adopting touch screen control for easy human-machine dialogue.
♦ The testing machine is equipped with travel limit and positive and negative force overload protection functions to prevent damage to the testing machine caused by misoperation.

four、usage method:
♦First, adjust the testing machine horizontally by placing it on the machine base with a spirit level and adjusting the foundation screws according to the spirit level's instructions to make it level (adjust when installing or moving the machine).
♦ Turn on the main power switch and allow the power to pass through each control panel of the machine.
♦ According to the testing requirements of the sample block, adjust the span of the two support rods and the position of the positioning block on the support rods to ensure that the sample block is in placeAdjust the counterweight on the pressure roller to keep it horizontal.
♦ Before the test, adjust the upper and lower stroke setting rings to the upper and lower limits of the required range, so that the lower fixture will touch after reaching this rangeStop the machine due to the limit switch.
♦ Select the appropriate testing speed, and for the stepless speed control, turn the speed knob on the control panel to the measured speed indicator number.
♦ Turn on the monitor and reset all displayed subtitles to zero, ready for testing.
♦ Start the motor to lower the intermediate plate and begin the test. At this point, the tensile strength value of the specimen will begin to be displayed until the specimen fractures. The load will remain high, and the value will be recorded. Then, remove the fractured specimen and clamp it and the display value according to the above method. After zeroing, the test can be resumed. If the test is completed, please turn off the power