DBQ-S JZXC-H18 WXJ-50 switch indicates transformer South Railway

BD1-7DBQ-S JZXC-H18 WXJ-50 switch indicates transformer South Railwaysignal

BD1-7 switch indicates transformer、

1. Purpose:

The DB1-7 type turnout representation unit is suitable for electrical centralized turnout representation circuits.

BD1-7 switch indicates transformerElectrical characteristics: see table

Capacity rated input rated output

Voltage (V) No load current (A) Voltage (V) Current (A)

7VA 220 ≤0.015 110 0.065

BD1-7 switch indicates transformerStructure and characteristics:

Using the AX type relay plug-in structure, the BD1-A7 switch representation transformer is combined with the resistor RXJC-10W, capacitor CTA-4uf-400V.AC, and outer cover to form a structure

The DBD-A7 turnout representation unit has the advantages of easy installation, small size, low noise, and beautiful appearance.

BD1-7 switch indicates transformerProduct appearance and installation:

Use AX type relay socket connection. External dimensions: 165mm × 165mm × 6mm. The identification pin hole numbers are 11 and 31.

Main technical specifications: Transformer capacity 34VA, input voltage 50Hz, 180V, 220V, output voltage 50Hz, 13V, 14V, 16V, primary no-load current 10mA, output current 2.08A.

BD1-7DBQ-S JZXC-H18 WXJ-50 switch indicates transformer South Railwaysignal

Main features of the product:
1. The relay is a heavy-duty DC electromagnetic relay, which uses the principle of "constant gravity" to force the closing contact to disconnect when the coil is powered off.
2. Using silver silver cadmium oxide contacts, it has strong anti adhesion and low contact resistance.
3. The magnetic circuit adopts electromagnetic pure iron material with small residual magnetism, and a stopper is installed at the closure between the armature and the iron core to ensure a small air gap in the magnetic circuit, prevent the ferromagnetic parts of the magnetic circuit from magnetizing, and ensure the reliable dropping of the relay.
4. The front coil of the relay is a short-circuit coil enclosed by a diode, without a rectifier unit. The AC power supply is directly connected to the coil and has a certain lightning protection function.
5. The relay contact system consists of ordinary contacts, with four sets of common contacts for dynamic connection and dynamic disconnection conversion.
6. Relays should be used in conjunction with isolation transformers to adjust the system current to ensure reliable operation and release of the relay, and to ensure that the lamp terminal voltage meets the specified adjustment range.
Product dimensions:
Relay: 165 mm x 49 mm x 163 mm (length x width x height)
Socket: 157 mm x 48 mm x 22 mm (length x width x height)


Product installation method:
The relay socket is installed on the combination frame (cabinet) with bolts, and the relay is horizontally inserted into the socket and clamped with a hanging spring.
Relay identification sales numbers 13 and 53.