DTS600 sensor data host LoRa communication two-way RS485

DTS600 sensor data host LoRa communication two-way RS485DTS600 sensor data host LoRa communication two-way RS485

DTS600 wireless multifunctional data monitoring host，adoptLora wireless communication can receive up to 240 wireless sensor accesses.possessRS485communication interface，supportstandardModbus RTU protocol.can be performedParameter settings (alarm parameters)NumberMailing AddressBaud rate、ID codeWait;can pass throughThe upper computer management software canrealRead data in real-time to achieve centralizationdata collection.

Key Function Description

Menu Key: Used for confirmation（Note:long pressEnter the system settings interface within 3 seconds.

Up key: parameter addition(Note: InsystemSet interface, press this key to exit the interface.

Down key: Subtract parameters.

Shift key: Select function (note: In the alarm status interface, press this key to switch, long press for 5 seconds after the alarm to mute)

Register type description

The starting address is0x0110 (272 in decimal), each set of data consists of 3 words, in order of data type

valid data1valid data2，The data types of the company's existing products are as follows：

01 represents temperature type, where data 1 (divided by 10) is the temperature value and data 2 is an invalid value-9999(0xD8F1)；

02 represents the temperature values of two channels, data 1 and data 2 are the temperature values of the first and second channels respectively, as above

03 represents the temperature and humidity type, where data 1 (calculated by dividing by 10) is the temperature value and data 2 (calculated by dividing by 10) is the humidity value;

*04 represents voltage type, reserved

05 represents the current type,Namely, data1 isCurrent value (unit)0.01A）data2 forinvalid value-9999(0xD8F1)；

*Data 2 can also be extended to NTC sensors

06 represents the switch type, where data 1 is the switch value and 0 isdisconnect，1 is closed, data 2 is an invalid value-9999(0xD8F1)；

07 represents water immersion type, that is, when the value of data 1 is 1, there is water, when it is 0, there is no water, and data 2 isReference resistance value (unit)K Euro；

*08-11 Reserved

*12expressTilt angle sensor, i.e. data1 is the X-axis inclination angle, and data 2 is the Y-axis inclination angle, ranging from -90.0 to 90.0;

13expresspiezoelectricVibration temperature type, i.e. data1 is the vibration value(Reference Range)0-16000）data2 is the temperature value；

*14expressMEMSVibration temperature type, i.e. data1 is vibrationPeak acceleration（0-16000mg）data2 is the temperature value；

15 represents the vibration (intensity) velocity, that is, data 1 is the vibration velocity value (0.00-50.00mm/s),data2 is the temperature value；

*19 represents the illuminance, that is, data 1 is the illuminance value (0-65535 lux),data2 is the temperature value；

Reserve 20-90

91 represents the pressure temperature type, where data 1 represents the pressure value (unit: 0.001Mpa) and data 2 represents the temperature value

95 represents a 4-20mA standard signal, with data 1 and data 2 representing current values of 4000-20000 (in 0.001mA)