Diaphragm vacuum pump MP-201Z

NegotiableUpdate on 12/04

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product details MP-201Z diaphragm vacuum pump provides negative pressure conditions for processes such as evaporation, distillation, crystallization, drying, sublimation, and vacuum filtration

Product Details

product details

Product details

The MP-201Z diaphragm vacuum pump provides negative pressure conditions for processes such as evaporation, distillation, crystallization, drying, sublimation, and vacuum filtration. Can be used to extract various toxic, flammable, explosive, strong acid, and strong alkali samples.

Usage characteristics:

The parts in contact with gas are made of PTFE material, which has strong resistance to chemical corrosion

● Can replace circulating water vacuum pumps and rotary vane vacuum pumps

● Small size, light weight, easy to move, space saving

Not consuming water resources, environmentally friendly and clean

The valve plate is made of imported materials

● Easy maintenance and repair

After 1500 hours of fatigue testing, it can work continuously and stably

Low pump body temperature

New structural design, significantly improved vacuum degree and pumping rate

Technical parameters:

Model	MP-201Z
Motor power (W)	180
Power supply (V/Hz)	220/50
Rotational speed (rpm)	1300
Suction port diameter (mm)	ф6
High vacuum degree (MPa)	0.0992（8mbar）
Extraction rate (L/min)	25
Dimensions (mm)	300W×230D×170H
Weight (kg)	10

MP隔膜泵配件

MP-201Z diaphragm vacuum pump can be used with small rotary evaporators below 5L, resistant to acid and alkali corrosion.

usage method:

1. Connect the power supply. Turn on the power switch. When the pump body is running smoothly, connect the air inlet of the machine to the pressure reducing device with a rubber hose and start working. If using a positive pressure airflow, one end of a rubber hose can be directly connected to the exhaust port of the machine to generate a stable airflow, which can be used for work.

When stopping the machine, first disconnect the pump from the pressure reducing device, and then turn off the power switch of the vacuum pump.

Troubleshooting methods:

Fault phenomenon	Reason for malfunction	Troubleshooting
Not starting	No power supply provided	Check the power supply and wiring
No vacuum pumping or intermittent vacuum pumping	The connected device is leaking air	Check the sealing of the connected device
	Leakage of connecting pipe	Replace the connecting pipe
	Leakage of pump head connecting pipe	Check the pump head connecting pipe or replace it with a new pipe
	Valve is dirty and blocked	Clean the external objects of the condenser tube and valve