ER-K5X Measurement Display Intelligent Control Series Device

serial number	Type II test display
model	ER-K5500	ER-K5600	ER-K5700	ER-K5800	ER-K5900
product view
function	1. Dynamic simulation indication 2. High voltage live display and locking 3. Temperature and humidity control 4. Voice error prevention 5. Remote/local control 6. Cabinet lighting 7. Opening/closing control 8. Energy storage status display
	·Large LCD real-time temperature and humidity digital display function	·Real time temperature and humidity digital display, measurement of three-phase voltage, current, power and other electrical parameters	·Real time temperature and humidity digital display, power measurement and control function	·Real time temperature and humidity display, medium and low voltage protection function	·Real time temperature and humidity display, medium and low voltage protection function
optional function	*RS485 communication * electrical verification and phase verification * cumulative number of circuit breaker opening and closing times * pre opening and pre closing flashing prompt * human body induction *Voltage measurement and display of opening and closing circuit * Programmable output 4-20mA
feature	·LCD display ·easy to operate ·Display rich information	·well-organized layout ·Measurable basic electrical parameters ·high precision	·Integrated multifunctionality ·Data storage and output functions	·powerful ·Reliable operation	·High precision ·responsive
install method	embedded	embedded	embedded	embedded	embedded
appearance size	185×252×66（mm） (Height x Width x Depth)	185×252×66（mm） (Height x Width x Depth)	185×252×66（mm） (Height x Width x Depth)	185×252×66（mm） (Height x Width x Depth)	185×252×66（mm） (Height x Width x Depth)
opening size	168×222（mm） (Height x Width)	168×222（mm） (Height x Width)	168×222（mm） (Height x Width)	168×222（mm） (Height x Width)	168×222（mm） (Height x Width)
Attention matter	1. The analog indication input signals are all taken from the auxiliary contacts of the corresponding primary components in the switchgear, which are passive contact types. 2. The heater and fan control outlets of the temperature and humidity control section are passive outputs; 3. The locking control outlet of the high-voltage live part is a passive output.
use condition	·Indoor use with good ventilation;·Altitude: ≤ 2km; ·Environmental temperature: -20 ℃ to 80 ℃;·Relative humidity: ≤ 95%; ·Atmospheric pressure: 80-110kPa; ·The surrounding medium is free of conductive dust, corrosive gases that can damage metal or insulation, mold, etc.

Note:
Please indicate the length of the sensor wire and whether it comes with optional features when placing an order;
Please specify the voltage level and product model when placing an order. If there are any special requirements, please inform us in advance.