EY2060 phase detector

NegotiableUpdate on 11/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The EY2060 phase detector adopts a clamp shaped non-contact induction measurement method, which does not require the wire to be pulled apart or the high-voltage exposed live wire to be touched. It can directly clamp the insulation outer skin of the three-phase live wire with three super induction high insulation clamps to detect the phase sequence, and at the same time, the sound and light indicate the positive or negative phase status of the three-phase power supply phase sequence. At the same time, it has functions such as live line inspection, simple electrical inspection, circuit breaker search, breakpoint positioning, and line maintenance.

Product Details

EY2060Phase detectorAdopting a clamp shaped non-contact induction measurement method, there is no need to disconnect the wires or touch the high-voltage exposed live wire. Simply clamp the insulation outer skin of the three-phase live wire with three super induction high insulation clamps to detect the phase sequence. At the same time, the sound and light indicate the positive or negative phase status of the three-phase power supply phase sequence. At the same time, it has functions such as live line inspection, simple electrical inspection, circuit breaker search, breakpoint positioning, and line maintenance.

EY2060Phase detectorThe detection is fast, convenient, and the display is clear at a glance, which improves the safety of on-site testing and effectively protects the personal safety of operators. It is a safety instrument for three-phase power phase sequence, motor detection, and line maintenance!

Two technical parameters

merit can	Phase detection (positive and negative), live line inspection, simple electrical inspection, phase loss judgment, circuit breaker search, breakpoint location, and line maintenance.
electricity source	9VBattery, continuous use time approximately70Hour.
measurement method	Non contact wire clamping method
Wire position	The measured wire is in the center position of the clamp
frequency rate	50Hz/60Hzautomatic recognition
Active power range	AC70～1000V，45/65Hz(Continuous sine wave input), static electricity detection.
Measure the highest voltage	AC1000V
Clamping wire size	outer diameterø1.5mm～ø48mm
apparent show	4The individual phase detector lights up sequentially in a clockwise direction;
	Reverse phase4The individual phase detector lights up sequentially in a counterclockwise direction;
	Within the voltage setting range of L1TheL2TheL3Light up the lamp;
	【 Lack of phase 】L1orL2orL3The light is not bright;
	L1orL2orL3The light is not bright.
Bee chirp	The instrument emits intermittent short beeps;
Bee chirp	The instrument emits a continuous long beep sound.
Battery inspection	Power supply after startupPOWERThe indicator light is on; Low batteryLOW BATTERYThe light is on.
Clamp the lead wire length	0.6m
instrument size	long117.6mmX width81mmX thickness25mm
Auto Shutdown	Start up approximately6After minutes, the instrument panel will automatically shut down to reduce battery consumption
battery voltage	When the battery voltage drops to about5.2VWhen the low battery voltage symbol is displayed, it reminds to replace the battery
Instrument quality	meter:260g(Contains battery)
Maximum rated power	300mVA
Working temperature and humidity	-10℃～55℃；80%rhbelow
Storage temperature and humidity	-20℃～60℃；90%rhbelow
insulation strength	3.7kVrms
Suitable for safety regulations	EN61010-1：2001TheEN61010-031：2002Pollution level2TheCATⅢ(600V)Instantaneous overvoltage6000V.