Electronic cigarette sensor tester, electronic cigarette negative pressure tester

Instructions for using Shenzhen Ruitaier Technology Electronic Cigarette Tester

Please remove the internal hexagonal screw that fixes the motor at the bottom before starting up!!! In the middle position of the 4 rubber feet!

1. Adjust the exhaust adjustment switch to a range between 0-100 on the scale, with a minimum of 50 (for testing purposes)

2. The adjustment method for the time interval switch (left for stop time, right for start time) is to press the+- sign and select the corresponding unit of H (hour) S seconds (the factory set time for this machine is 5 seconds for each stop start time), which can be set according to personal requirements.

3. The counter has two buttons, and pressing them in a cylindrical shape clears 0. The operation method is as follows: first, check the displacement small switch on the right (above one position of the counter). When it is turned to LOCK, it is locked. At this time, the cylindrical shape cannot be pressed, and the LOCK needs to be turned off before pressing the cylindrical switch to clear 0. If pressing it once cannot reset, please press it multiple times.

4. When the pressure gauge displays that the machine is starting, the comparison item indicates that the pressure gauge does not move between 50, but when you insert the experimental electronic cigarette, the pressure gauge will start displaying!