Electronic fogger working voltage and current tester

Electronic fogger working voltage and current tester

1、 Electronic fogger working voltage and current testerApplication:

This machine is used to test the output voltage and current of electronic fogger battery rods during operation, with and without suction

Automatically determine whether it is within the required range, qualified or unqualified.

2、 Electronic fogger working voltage and current testerThe principle is:

When the battery rod is insertedThere is a suction test seatAfterwards, this tester will sense and simultaneously display the output voltage and current of the battery rod on the screen

Real time display, with a delay of 0-5 seconds (time can be adjusted arbitrarily to facilitate voltage and current stability), automatically determines: if the measured voltage is less than the set lower limit or greater than the set upper limit, and the measured current is less than the set lower limit or greater than the set upper limit, the red indicator light will light up to indicate non conformance, and the screen will display "code - reason for non conformance"; If the measured voltage is between the set lower and upper limits and the measured current is between the set lower and upper limits, the green indicator light will turn on, indicating that it is qualified, and the screen will display qualified.

When the battery rod is insertedNon suction test seatAfterwards, this tester will also sense and display the output voltage and current of the battery rod in real time through the voltmeter and ammeter, respectively. At this time, there should be no current or voltage display. If it is normal, the green light will be on to indicate qualification, and the screen will display qualification. When the voltage or current is greater than 0.01, the red light will light up to indicate non conformance, and the screen will display "code+reason for non conformance".