- Phone
-
Address
No. 3 Guanggu Avenue, Donghu New Technology Development Zone, Wuhan
Product Categories
Wuhan Grace New Energy Co., Ltd
Experimental automatic coating machine
NegotiableUpdate on 08/10
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The experimental automatic coating machine is suitable for the continuous coating process of positive and negative electrodes of batteries. It adopts a three roll transfer coating to apply a very uniform thin coating on the surface of the substrate, and then automatically dries it through a drying system. This process can replace the manual scraping and oven drying operations and improve the scraping process
Product Details
Technical Parameter
| Coating method | Single sided continuous |
| Applicable baseband | Copper foil, aluminum foil, etc |
| Pole width | ≤300mm |
| coating speed | 100-600mm/min (adjustable) |
| Coating accuracy | ≤±0.003mm |
| Roller jumping during coating | ≤2μm |
| Coating roller diameter | Φ100mm |
| Unwinding diameter (Max) | Φ250mm |
| Roll diameter (Max) | Φ250mm |
| tension control | 5-50N (adjustable) |
| Scraper positioning accuracy | The dial gauge displays an accuracy of ± 1 μ m |
| Drying temperature (Max) | Room temperature~150 ℃ adjustable with hot air circulation |
| Drying method | Upper and lower air nozzles for blowing (resistance wire heating) |
| heating zone | Zone 1, 1.2 meters |
| compressed air | Pressure 0.5Mpa~0.7Mpa, flow rate: 0.04M3/min |
| power supply | AC220V / 50Hz |
| maximum power | About 5kW |
| External dimensions | Length x Width x Height=1800 x 810 x 1300 |
| weight |
About 1T |
Similar Product Recommend
