External mounted liquid level switch manufacturer

NegotiableUpdate on 12/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

XH-KC external mounted liquid level switch manufacturer's room is a device installed on the outer wall of a sealed tank to achieve fixed-point liquid level measurement and alarm for liquids. This instrument does not require openings on the tank wall during installation, and it does not worry about the liquid medium inside the container, nor does it come into contact with the gaseous medium inside the container. Therefore, the installation is simple and fast, and it is very safe and reliable to use. During maintenance, it is not necessary to clean the tank, use hot work, or affect normal production.

Product Details

External mounted liquid level switch manufacturerProduct Features

1. Safe and reliable (The sensor is installed outside the tank and does not come into contact with liquids and gases when measuring toxic, corrosive, high-pressure, volatile, or leaking media, making it very safe and easy to maintain and repair)

2. Long service life, no mechanical moving parts in sensors and instruments, and strict sealing, isolated from the outside world, will not wear or corrode.

3. Do not open holes or clean the tank during installation and maintenance, which does not affect normal production.

4. Widely used because it is independent of the pressure, temperature, density, dielectric constant, viscosity, and corrosiveness of the measured medium.

External mounted liquid level switch manufacturerTechnical Specifications

Repetitive error:±2mmSensor connection method: magnet adsorption, adhesive, zip tie

Lag:1~3Second container thickness:2~50mm

Power supply:24V DC±5%or220V ACProtection level:IP65

Output signal: Relay output explosion-proof mark:ExdIICT6Gb

Relay capacity:60V AC/DC 0.5ASuitable locations: Explosive gas environments other than coal mines

or250V AC/DC 5AHost usage environment:—40℃~+60℃

Electrical interface specifications:M20*1.5Ultrasonic probe usage environment temperature:—40℃~+100℃The high-temperature probe can be used in environments with the highest possible temperature200℃）

(Various interfaces can be adapted according to the site) Humidity: 15%~RH

External mounted liquid level switch manufacturerApplication conditions:

The material of the tank must be hard and dense. For example: carbon steel, 16MnR, stainless steel, fiberglass, etc.