F23-D wireless remote control for crane

product image

Product description

Suitable for dual hook, dual speed/multi speed driving

For industrial control remote control with less than 23 contacts.

Transmitter (handheld)

Size: 21.8x6.0x6.0 centimeters

Weight: Approximately 350 grams

Receiver

Size: 29x23x7cm

Weight: 1900 grams

12 operation buttons, of which 11 are two-stage buttons and 1 is a total stop button

Control points reach 23

Equipped with a battery voltage warning device, it can automatically cut off the circuit when the voltage is insufficient.

Secure key switch to prevent unauthorized use.

The improved model is equipped with a two-stage button that adopts a fully sealed integrated dual speed button, which has a longer service life and better hand feel. The main stop button adopts a self-locking red "mushroom head" button, further emphasizing the overall safety factor.

Up/down, east/west, and south/north can be set to mutually inhibit each other.

The startup button can be set by the computer to functions such as startup, acceleration, throttle, and normal.

Unique dual motor mode: When the button is pressed for one speed, the one speed relay conducts; Press until the second speed relay is conductive and the first speed relay trips (used for overhead cranes with dual motor fast and slow speeds)

Control distance: up to 100 meters

Security code: 32-bit (4.3 billion sets)

Operating temperature: -35 ℃ to+80 ℃ (without considering battery temperature resistance)

Protection level: IP65

Transmitter power supply: DC 3V (2 alkaline No. 5 batteries can be used for 1 month)

Receiver power supply: AC 380V/220V/48V optional, or DC 12V/24V

Output contact capacity: 5 ampere fully sealed relay output (using AC 250V/10A relay, 5 ampere fuse).

Configuration:

1 transmitter (including strap)

Receiver 1 unit

The receiver comes with a waterproof interface (requires self configured cable connection)

1 operation and maintenance manual