FA24 type glass rotor flowmeter

NegotiableUpdate on 12/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Overview: The FA24 glass rotor flowmeter is a product manufactured using international processes and equipment, with quality and performance reaching international standards, high accuracy levels, and a unique design. The flange joint can rotate to adjust the four mounting holes, making it easy to replace the cone tube and float without removing the flowmeter from the pipeline

Product Details

Overview

FA24 typeGlass rotor flowmeterIt is a product manufactured using international technology and equipment, with quality performance reaching international standards and high precision levels. It adopts a unique design, and the flange joint can rotate to adjust the four mounting holes. The cone tube and float can be easily replaced without removing the flowmeter from the pipeline.
A ruler plate can be added.

Appearance and installation dimensions

Path diameter	Window size （a×b）	C	B	A	E	weight (kg)
DN15	37×302	500	Φ65	Φ95	4-Φ14	6
DN25	52×294	500	Φ85	Φ115	4-Φ14	10
DN40	64×278	500	Φ110	Φ145	4-Φ14	13
DN50	94×266	500	Φ125	Φ160	4-Φ18	18
DN80	132×302	500	Φ150	Φ185	4-Φ18	32

Note: Flange standard GB/T9119-2000
DN(15～50), PN1.0MPa DN80 PN0.6MPa

Model specifications and technical parameters

Path diameter (mm)	model	measurement range		crushing damage (Pa)	maximum pressure (MPa)	Maximum temperature (℃)	accuracy class
Path diameter (mm)	model	Water (20 ℃) L/h	air (20℃ 101325Pa)m3/h	crushing damage (Pa)	maximum pressure (MPa)	Maximum temperature (℃)	accuracy class
DN15	FA24-15 FA24-15F	10~100 16~160 25~250 40~400 63~630	0.12～1.2 0.2～2 0.3～3 0.5～5 0.8～8 1.2～12 2~20	1100 1200 1700 2000 2500 3000	1.0	120	2.5
DN25	FA24-25 FA24-25F	63~630 100~1000 160~1600 250~2500	2~20 3~30 5~50 6~60	2800 4000 5000 6000	1.0
DN40	FA24-40 FA24-40F	250~2500 400~4000	5~50 8~80 12~120	3400 4000 5000	0.9
DN50	FA24-50 FA24-50F	630~6300 (1～10)m3/h	12~120 20~200 30~300	4800 6500 8500	0.7
DN80	FA24-80 FA24-80F	(1.6～16)m3/h (2.5～25)m3/h (8～40)m3/h		8000 9000 9600	0.5

Note: 1. The pressure of the fluid entering the flowmeter must be at least twice the pressure loss of the liquid and at least five times the pressure loss of the gas.
2. Accuracy level 1.5 is required, please indicate it on the order.
3. The flow rate of the corrosion-resistant PTFE float is one level lower than that of the ordinary type.

Full stainless steel type FA24- () B/BF FA24- () Bo/BoF

The flange, float, guide rod, support plate, and bolts are all made of stainless steel 304 (1Cr18Ni9Ti), model FA24- () B.
If 316 is required for the liquid receiving material, the model number is FA24- () B0 and it needs to be customized.
If stainless steel lined with PTFE is required, the model is FA24- () BF (316 is B0F), which needs to be customized.

spare parts

model	Float	Base	Stop stop	Sealing rings and gaskets	Guide rod
FA24 - 15、25 、 40, 50, 80	1Cr18Ni9Ti stainless steel	Cast iron	fluoroplastic	high-temperature resistant rubber	1Cr18Ni9Ti stainless steel
FA24 - 15F、2 5 F 、 40F、50F、80F	Outsourced fluoroplastics	Cast iron lined with fluoroplastic*	fluoroplastic	fluororubber

Note: If the medium is an organic solvent, please specify when ordering.