FIP (FLS) F6.60 plug-in electromagnetic flowmeter transmitter sensor probe

The FIP (FLS) F6.60 plug-in electromagnetic flowmeter transmitter sensor probe is an online installed electromagnetic flow transmitter that can be used to measure contaminated liquids with conductivity. F6.60 provides three options: frequency output connected to FIP flow monitor, 4-20mA output for long-distance output and PLC connection, and freely adjustable volume pulse output. The F6.60 plug-in electromagnetic flowmeter is equipped with a USB interface and software, and parameters can be set according to special installation requirements through a computer. This sensor can be installed on pipeline sizes ranging from DN15 to DN600.

application

•Water and wastewater treatment

•Raw water extraction

•Industrial water distribution

•textile industry

•Swimming pools, hot springs, and aquariums

• HVAC

•Processing and manufacturing industries

•Application of seawater

Key Features

•No moving parts, no wear and tear, no maintenance required

•High mechanical resistance

•Accurate measurement of contaminated liquids

•Pipeline size range: fromDN15（0.5”）- DN600（24”）

•Adjustable flow rate range

•Low pressure drop

•Users can set operational parameters

• 4-20mAPulse output for frequency or volume measurement

•Optional bidirectional flow measurement (forF6.60）

•Salt water application (high concentration chloride such as seawater) and high temperature conditionsspecialversion

Technical data

General rule

•Pipeline size range:DN15 - DN600（0.5” - 24”）

•Flow rate range:

- F6.60 ：(From)0.05 - 8m/s）

- F6.63 ：(From)0.15 - 8m/s）

•Full range:8 m/s (26.24 ft/s)

•Linear: Reading based± 1% + 1.0 cm/s

•Repeatability: Reading accuracy± 0.5%

•Material

-Shell:ABS

•Welding materials:

-Sensor body:316Lstainless steel/PVDF；316Lstainless steel/PEEK；CuNi合金/PVDF

- OCircle:EPDMorFPM

-Electrode:316LStainless steel orCuNi合金

electrical

•power supply

- 12 - 24VDC±10%Voltage stabilization (reverse polarity and short circuit protection)

•Current consumption:≤250 mA

-Protective grounding:< 10 Ω

•Current output:

- 4-20 mAIsolation

-Loop impedance:≤800Ω（24VDC）- 250Ω（12VDC）

-Positive flow indication or negative flow indication

•Solid state relay output:

-Users can choose from: low value alarm, high value alarm, volume measurement, pulse output, window alarm, close

-pulse/minute:≤300

-Delay: Users can choose

•Open collector output (frequency):

-Type: Open collector electrodeNPN

-Frequency:0 – 800 Hz

-Pull up voltage:24 VDC

-electric current:50 mA, limited current

-compatibleM9.02TheM9.50TheM9.07TheM9.08andM9.10

•Open collector output (direction in)F6.63Not available):

-Type: Open collector electrodeNPN

-Pull up voltage:24 VDC

-electric current:50mA, limited current

-Current direction:

0 VDCarrow direction

+ VDCArrow reverse

environment

•Storage temperature:-30°C - +80°C（-22°F - +176°F）

•Ambient temperature-20°C - +70°C（-4°F - +158°F）

•relative humidity0 - 95%(No condensation)

•Liquid conditions:

-Homogeneous liquid, paste or slurry, solid component

-Conductivity:≥20 μS/cm

-temperature

PVDFBottom version:-10°C - +60°C（14°F - 140°F）

PEEKBottom version:-10°C - +150°C（14°F - 302°F)

•Work pressure

- ≤16 bar @ 25°C (232 psi @ 77°F)

-≤8.6 bar @ 60°C (124 psi @ 140°F)

FIP F6.60Electromagnetic flowmeter transmitter model:F6.60.09; F6.60.10; F6.60.11; F6.60.12; F6.60.33; F6.60.34; F6.60.35; F6.60.36; F6.60.38; F6.60.40.

Other models of electromagnetic flowmeter transmittersFIP (FLS)F6.61.01Hot swappable electromagnetic flow sensor